4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
23 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
27 * Functions to convert between a list of vdevs and an nvlist representing the
28 * configuration. Each entry in the list can be one of:
31 * disk=(path=..., devid=...)
40 * While the underlying implementation supports it, group vdevs cannot contain
41 * other group vdevs. All userland verification of devices is contained within
42 * this file. If successful, the nvlist returned can be passed directly to the
43 * kernel; we've done as much verification as possible in userland.
45 * Hot spares are a special case, and passed down as an array of disk vdevs, at
46 * the same level as the root of the vdev tree.
48 * The only function exported by this file is 'make_root_vdev'. The
49 * function performs several passes:
51 * 1. Construct the vdev specification. Performs syntax validation and
52 * makes sure each device is valid.
53 * 2. Check for devices in use. Using libblkid to make sure that no
54 * devices are also in use. Some can be overridden using the 'force'
55 * flag, others cannot.
56 * 3. Check for replication errors if the 'force' flag is not specified.
57 * validates that the replication level is consistent across the
59 * 4. Call libzfs to label any whole disks with an EFI label.
68 #include <libnvpair.h>
73 #include <sys/efi_partition.h>
76 #include <sys/mntent.h>
77 #include <uuid/uuid.h>
79 #include <blkid/blkid.h>
81 #define blkid_cache void *
82 #endif /* HAVE_LIBBLKID */
84 #include "zpool_util.h"
87 * For any given vdev specification, we can have multiple errors. The
88 * vdev_error() function keeps track of whether we have seen an error yet, and
89 * prints out a header if its the first error we've seen.
96 vdev_error(const char *fmt, ...)
101 (void) fprintf(stderr, gettext("invalid vdev specification\n"));
103 (void) fprintf(stderr, gettext("use '-f' to override "
104 "the following errors:\n"));
106 (void) fprintf(stderr, gettext("the following errors "
107 "must be manually repaired:\n"));
112 (void) vfprintf(stderr, fmt, ap);
117 * Check that a file is valid. All we can do in this case is check that it's
118 * not in use by another pool, and not in use by swap.
121 check_file(const char *file, boolean_t force, boolean_t isspare)
129 if ((fd = open(file, O_RDONLY)) < 0)
132 if (zpool_in_use(g_zfs, fd, &state, &name, &inuse) == 0 && inuse) {
136 case POOL_STATE_ACTIVE:
137 desc = gettext("active");
140 case POOL_STATE_EXPORTED:
141 desc = gettext("exported");
144 case POOL_STATE_POTENTIALLY_ACTIVE:
145 desc = gettext("potentially active");
149 desc = gettext("unknown");
154 * Allow hot spares to be shared between pools.
156 if (state == POOL_STATE_SPARE && isspare)
159 if (state == POOL_STATE_ACTIVE ||
160 state == POOL_STATE_SPARE || !force) {
162 case POOL_STATE_SPARE:
163 vdev_error(gettext("%s is reserved as a hot "
164 "spare for pool %s\n"), file, name);
167 vdev_error(gettext("%s is part of %s pool "
168 "'%s'\n"), file, desc, name);
184 (void) fprintf(stderr, gettext("warning: device in use checking "
185 "failed: %s\n"), strerror(err));
189 check_slice(const char *path, blkid_cache cache, int force, boolean_t isspare)
191 struct stat64 statbuf;
195 #endif /* HAVE_LIBBLKID */
197 if (stat64(path, &statbuf) != 0) {
198 vdev_error(gettext("cannot stat %s: %s\n"),
199 path, strerror(errno));
204 /* No valid type detected device is safe to use */
205 value = blkid_get_tag_value(cache, "TYPE", path);
210 * If libblkid detects a ZFS device, we check the device
211 * using check_file() to see if it's safe. The one safe
212 * case is a spare device shared between multiple pools.
214 if (strcmp(value, "zfs") == 0) {
215 err = check_file(path, force, isspare);
221 vdev_error(gettext("%s contains a filesystem of "
222 "type '%s'\n"), path, value);
228 err = check_file(path, force, isspare);
229 #endif /* HAVE_LIBBLKID */
235 * Validate a whole disk. Iterate over all slices on the disk and make sure
236 * that none is in use by calling check_slice().
239 check_disk(const char *path, blkid_cache cache, int force,
240 boolean_t isspare, boolean_t iswholedisk)
243 char slice_path[MAXPATHLEN];
247 /* This is not a wholedisk we only check the given partition */
249 return check_slice(path, cache, force, isspare);
252 * When the device is a whole disk try to read the efi partition
253 * label. If this is successful we safely check the all of the
254 * partitions. However, when it fails it may simply be because
255 * the disk is partitioned via the MBR. Since we currently can
256 * not easily decode the MBR return a failure and prompt to the
257 * user to use force option since we cannot check the partitions.
259 if ((fd = open(path, O_RDWR|O_DIRECT|O_EXCL)) < 0) {
264 if ((err = efi_alloc_and_read(fd, &vtoc)) != 0) {
270 vdev_error(gettext("%s does not contain an EFI "
271 "label but it may contain partition\n"
272 "information in the MBR.\n"), path);
278 * The primary efi partition label is damaged however the secondary
279 * label at the end of the device is intact. Rather than use this
280 * label we should play it safe and treat this as a non efi device.
282 if (vtoc->efi_flags & EFI_GPT_PRIMARY_CORRUPT) {
287 /* Partitions will no be created using the backup */
290 vdev_error(gettext("%s contains a corrupt primary "
291 "EFI label.\n"), path);
296 for (i = 0; i < vtoc->efi_nparts; i++) {
298 if (vtoc->efi_parts[i].p_tag == V_UNASSIGNED ||
299 uuid_is_null((uchar_t *)&vtoc->efi_parts[i].p_guid))
302 if (strncmp(path, UDISK_ROOT, strlen(UDISK_ROOT)) == 0)
303 (void) snprintf(slice_path, sizeof (slice_path),
304 "%s%s%d", path, "-part", i+1);
306 (void) snprintf(slice_path, sizeof (slice_path),
307 "%s%s%d", path, isdigit(path[strlen(path)-1]) ?
310 err = check_slice(slice_path, cache, force, isspare);
322 check_device(const char *path, boolean_t force,
323 boolean_t isspare, boolean_t iswholedisk)
325 static blkid_cache cache = NULL;
329 * There is no easy way to add a correct blkid_put_cache() call,
330 * memory will be reclaimed when the command exits.
335 if ((err = blkid_get_cache(&cache, NULL)) != 0) {
340 if ((err = blkid_probe_all(cache)) != 0) {
341 blkid_put_cache(cache);
346 #endif /* HAVE_LIBBLKID */
348 return check_disk(path, cache, force, isspare, iswholedisk);
352 * By "whole disk" we mean an entire physical disk (something we can
353 * label, toggle the write cache on, etc.) as opposed to the full
354 * capacity of a pseudo-device such as lofi or did. We act as if we
355 * are labeling the disk, which should be a pretty good test of whether
356 * it's a viable device or not. Returns B_TRUE if it is and B_FALSE if
360 is_whole_disk(const char *path)
362 struct dk_gpt *label;
365 if ((fd = open(path, O_RDWR|O_DIRECT|O_EXCL)) < 0)
367 if (efi_alloc_and_init(fd, EFI_NUMPAR, &label) != 0) {
377 * This may be a shorthand device path or it could be total gibberish.
378 * Check to see if it's a known device in /dev/, /dev/disk/by-id,
379 * /dev/disk/by-label, /dev/disk/by-path, /dev/disk/by-uuid, or
380 * /dev/disk/zpool/. As part of this check, see if we've been given
381 * an entire disk (minus the slice number).
384 is_shorthand_path(const char *arg, char *path,
385 struct stat64 *statbuf, boolean_t *wholedisk)
387 if (zfs_resolve_shortname(arg, path, MAXPATHLEN) == 0) {
388 *wholedisk = is_whole_disk(path);
389 if (*wholedisk || (stat64(path, statbuf) == 0))
393 strlcpy(path, arg, sizeof(path));
394 memset(statbuf, 0, sizeof(*statbuf));
395 *wholedisk = B_FALSE;
401 * Create a leaf vdev. Determine if this is a file or a device. If it's a
402 * device, fill in the device id to make a complete nvlist. Valid forms for a
405 * /dev/xxx Complete disk path
406 * /xxx Full path to file
407 * xxx Shorthand for /dev/disk/yyy/xxx
410 make_leaf_vdev(nvlist_t *props, const char *arg, uint64_t is_log)
412 char path[MAXPATHLEN];
413 struct stat64 statbuf;
414 nvlist_t *vdev = NULL;
416 boolean_t wholedisk = B_FALSE;
420 * Determine what type of vdev this is, and put the full path into
421 * 'path'. We detect whether this is a device of file afterwards by
422 * checking the st_mode of the file.
426 * Complete device or file path. Exact type is determined by
427 * examining the file descriptor afterwards. Symbolic links
428 * are resolved to their real paths for the is_whole_disk()
429 * and S_ISBLK/S_ISREG type checks. However, we are careful
430 * to store the given path as ZPOOL_CONFIG_PATH to ensure we
431 * can leverage udev's persistent device labels.
433 if (realpath(arg, path) == NULL) {
434 (void) fprintf(stderr,
435 gettext("cannot resolve path '%s'\n"), arg);
439 wholedisk = is_whole_disk(path);
440 if (!wholedisk && (stat64(path, &statbuf) != 0)) {
441 (void) fprintf(stderr,
442 gettext("cannot open '%s': %s\n"),
443 path, strerror(errno));
447 /* After is_whole_disk() check restore original passed path */
448 strlcpy(path, arg, MAXPATHLEN);
450 err = is_shorthand_path(arg, path, &statbuf, &wholedisk);
453 * If we got ENOENT, then the user gave us
454 * gibberish, so try to direct them with a
455 * reasonable error message. Otherwise,
456 * regurgitate strerror() since it's the best we
460 (void) fprintf(stderr,
461 gettext("cannot open '%s': no such "
462 "device in %s\n"), arg, DISK_ROOT);
463 (void) fprintf(stderr,
464 gettext("must be a full path or "
465 "shorthand device name\n"));
468 (void) fprintf(stderr,
469 gettext("cannot open '%s': %s\n"),
470 path, strerror(errno));
477 * Determine whether this is a device or a file.
479 if (wholedisk || S_ISBLK(statbuf.st_mode)) {
480 type = VDEV_TYPE_DISK;
481 } else if (S_ISREG(statbuf.st_mode)) {
482 type = VDEV_TYPE_FILE;
484 (void) fprintf(stderr, gettext("cannot use '%s': must be a "
485 "block device or regular file\n"), path);
490 * Finally, we have the complete device or file, and we know that it is
491 * acceptable to use. Construct the nvlist to describe this vdev. All
492 * vdevs have a 'path' element, and devices also have a 'devid' element.
494 verify(nvlist_alloc(&vdev, NV_UNIQUE_NAME, 0) == 0);
495 verify(nvlist_add_string(vdev, ZPOOL_CONFIG_PATH, path) == 0);
496 verify(nvlist_add_string(vdev, ZPOOL_CONFIG_TYPE, type) == 0);
497 verify(nvlist_add_uint64(vdev, ZPOOL_CONFIG_IS_LOG, is_log) == 0);
498 if (strcmp(type, VDEV_TYPE_DISK) == 0)
499 verify(nvlist_add_uint64(vdev, ZPOOL_CONFIG_WHOLE_DISK,
500 (uint64_t)wholedisk) == 0);
506 if (nvlist_lookup_string(props,
507 zpool_prop_to_name(ZPOOL_PROP_ASHIFT), &value) == 0)
508 zfs_nicestrtonum(NULL, value, &ashift);
511 verify(nvlist_add_uint64(vdev, ZPOOL_CONFIG_ASHIFT,
519 * Go through and verify the replication level of the pool is consistent.
520 * Performs the following checks:
522 * For the new spec, verifies that devices in mirrors and raidz are the
525 * If the current configuration already has inconsistent replication
526 * levels, ignore any other potential problems in the new spec.
528 * Otherwise, make sure that the current spec (if there is one) and the new
529 * spec have consistent replication levels.
531 typedef struct replication_level {
533 uint64_t zprl_children;
534 uint64_t zprl_parity;
535 } replication_level_t;
537 #define ZPOOL_FUZZ (16 * 1024 * 1024)
540 * Given a list of toplevel vdevs, return the current replication level. If
541 * the config is inconsistent, then NULL is returned. If 'fatal' is set, then
542 * an error message will be displayed for each self-inconsistent vdev.
544 static replication_level_t *
545 get_replication(nvlist_t *nvroot, boolean_t fatal)
553 replication_level_t lastrep = { 0 }, rep, *ret;
554 boolean_t dontreport;
556 ret = safe_malloc(sizeof (replication_level_t));
558 verify(nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN,
559 &top, &toplevels) == 0);
561 lastrep.zprl_type = NULL;
562 for (t = 0; t < toplevels; t++) {
563 uint64_t is_log = B_FALSE;
568 * For separate logs we ignore the top level vdev replication
571 (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_IS_LOG, &is_log);
575 verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE,
577 if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN,
578 &child, &children) != 0) {
580 * This is a 'file' or 'disk' vdev.
582 rep.zprl_type = type;
583 rep.zprl_children = 1;
589 * This is a mirror or RAID-Z vdev. Go through and make
590 * sure the contents are all the same (files vs. disks),
591 * keeping track of the number of elements in the
594 * We also check that the size of each vdev (if it can
595 * be determined) is the same.
597 rep.zprl_type = type;
598 rep.zprl_children = 0;
600 if (strcmp(type, VDEV_TYPE_RAIDZ) == 0) {
601 verify(nvlist_lookup_uint64(nv,
602 ZPOOL_CONFIG_NPARITY,
603 &rep.zprl_parity) == 0);
604 assert(rep.zprl_parity != 0);
610 * The 'dontreport' variable indicates that we've
611 * already reported an error for this spec, so don't
612 * bother doing it again.
617 for (c = 0; c < children; c++) {
618 nvlist_t *cnv = child[c];
620 struct stat64 statbuf;
621 uint64_t size = -1ULL;
627 verify(nvlist_lookup_string(cnv,
628 ZPOOL_CONFIG_TYPE, &childtype) == 0);
631 * If this is a replacing or spare vdev, then
632 * get the real first child of the vdev.
634 if (strcmp(childtype,
635 VDEV_TYPE_REPLACING) == 0 ||
636 strcmp(childtype, VDEV_TYPE_SPARE) == 0) {
640 verify(nvlist_lookup_nvlist_array(cnv,
641 ZPOOL_CONFIG_CHILDREN, &rchild,
643 assert(rchildren == 2);
646 verify(nvlist_lookup_string(cnv,
651 verify(nvlist_lookup_string(cnv,
652 ZPOOL_CONFIG_PATH, &path) == 0);
655 * If we have a raidz/mirror that combines disks
656 * with files, report it as an error.
658 if (!dontreport && type != NULL &&
659 strcmp(type, childtype) != 0) {
665 "mismatched replication "
666 "level: %s contains both "
667 "files and devices\n"),
675 * According to stat(2), the value of 'st_size'
676 * is undefined for block devices and character
677 * devices. But there is no effective way to
678 * determine the real size in userland.
680 * Instead, we'll take advantage of an
681 * implementation detail of spec_size(). If the
682 * device is currently open, then we (should)
683 * return a valid size.
685 * If we still don't get a valid size (indicated
686 * by a size of 0 or MAXOFFSET_T), then ignore
687 * this device altogether.
689 if ((fd = open(path, O_RDONLY)) >= 0) {
690 err = fstat64(fd, &statbuf);
693 err = stat64(path, &statbuf);
697 statbuf.st_size == 0 ||
698 statbuf.st_size == MAXOFFSET_T)
701 size = statbuf.st_size;
704 * Also make sure that devices and
705 * slices have a consistent size. If
706 * they differ by a significant amount
707 * (~16MB) then report an error.
710 (vdev_size != -1ULL &&
711 (labs(size - vdev_size) >
718 "%s contains devices of "
719 "different sizes\n"),
732 * At this point, we have the replication of the last toplevel
733 * vdev in 'rep'. Compare it to 'lastrep' to see if its
736 if (lastrep.zprl_type != NULL) {
737 if (strcmp(lastrep.zprl_type, rep.zprl_type) != 0) {
743 "mismatched replication level: "
744 "both %s and %s vdevs are "
746 lastrep.zprl_type, rep.zprl_type);
749 } else if (lastrep.zprl_parity != rep.zprl_parity) {
755 "mismatched replication level: "
756 "both %llu and %llu device parity "
757 "%s vdevs are present\n"),
763 } else if (lastrep.zprl_children != rep.zprl_children) {
769 "mismatched replication level: "
770 "both %llu-way and %llu-way %s "
771 "vdevs are present\n"),
772 lastrep.zprl_children,
789 * Check the replication level of the vdev spec against the current pool. Calls
790 * get_replication() to make sure the new spec is self-consistent. If the pool
791 * has a consistent replication level, then we ignore any errors. Otherwise,
792 * report any difference between the two.
795 check_replication(nvlist_t *config, nvlist_t *newroot)
799 replication_level_t *current = NULL, *new;
803 * If we have a current pool configuration, check to see if it's
804 * self-consistent. If not, simply return success.
806 if (config != NULL) {
809 verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE,
811 if ((current = get_replication(nvroot, B_FALSE)) == NULL)
815 * for spares there may be no children, and therefore no
816 * replication level to check
818 if ((nvlist_lookup_nvlist_array(newroot, ZPOOL_CONFIG_CHILDREN,
819 &child, &children) != 0) || (children == 0)) {
825 * If all we have is logs then there's no replication level to check.
827 if (num_logs(newroot) == children) {
833 * Get the replication level of the new vdev spec, reporting any
834 * inconsistencies found.
836 if ((new = get_replication(newroot, B_TRUE)) == NULL) {
842 * Check to see if the new vdev spec matches the replication level of
846 if (current != NULL) {
847 if (strcmp(current->zprl_type, new->zprl_type) != 0) {
849 "mismatched replication level: pool uses %s "
850 "and new vdev is %s\n"),
851 current->zprl_type, new->zprl_type);
853 } else if (current->zprl_parity != new->zprl_parity) {
855 "mismatched replication level: pool uses %llu "
856 "device parity and new vdev uses %llu\n"),
857 current->zprl_parity, new->zprl_parity);
859 } else if (current->zprl_children != new->zprl_children) {
861 "mismatched replication level: pool uses %llu-way "
862 "%s and new vdev uses %llu-way %s\n"),
863 current->zprl_children, current->zprl_type,
864 new->zprl_children, new->zprl_type);
877 zero_label(char *path)
879 const int size = 4096;
883 if ((fd = open(path, O_WRONLY|O_EXCL)) < 0) {
884 (void) fprintf(stderr, gettext("cannot open '%s': %s\n"),
885 path, strerror(errno));
889 memset(buf, 0, size);
890 err = write(fd, buf, size);
891 (void) fdatasync(fd);
895 (void) fprintf(stderr, gettext("cannot zero first %d bytes "
896 "of '%s': %s\n"), size, path, strerror(errno));
901 (void) fprintf(stderr, gettext("could only zero %d/%d bytes "
902 "of '%s'\n"), err, size, path);
910 * Go through and find any whole disks in the vdev specification, labelling them
911 * as appropriate. When constructing the vdev spec, we were unable to open this
912 * device in order to provide a devid. Now that we have labelled the disk and
913 * know that slice 0 is valid, we can construct the devid now.
915 * If the disk was already labeled with an EFI label, we will have gotten the
916 * devid already (because we were able to open the whole disk). Otherwise, we
917 * need to get the devid after we label the disk.
920 make_disks(zpool_handle_t *zhp, nvlist_t *nv)
924 char *type, *path, *diskname;
925 char devpath[MAXPATHLEN];
926 char udevpath[MAXPATHLEN];
928 struct stat64 statbuf;
931 verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) == 0);
933 if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN,
934 &child, &children) != 0) {
936 if (strcmp(type, VDEV_TYPE_DISK) != 0)
940 * We have a disk device. If this is a whole disk write
941 * out the efi partition table, otherwise write zero's to
942 * the first 4k of the partition. This is to ensure that
943 * libblkid will not misidentify the partition due to a
944 * magic value left by the previous filesystem.
946 verify(!nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path));
947 verify(!nvlist_lookup_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK,
951 ret = zero_label(path);
955 if (realpath(path, devpath) == NULL) {
957 (void) fprintf(stderr,
958 gettext("cannot resolve path '%s'\n"), path);
963 * Remove any previously existing symlink from a udev path to
964 * the device before labeling the disk. This makes
965 * zpool_label_disk_wait() truly wait for the new link to show
966 * up instead of returning if it finds an old link still in
967 * place. Otherwise there is a window between when udev
968 * deletes and recreates the link during which access attempts
969 * will fail with ENOENT.
971 zfs_append_partition(path, udevpath, sizeof (udevpath));
972 if ((strncmp(udevpath, UDISK_ROOT, strlen(UDISK_ROOT)) == 0) &&
973 (lstat64(udevpath, &statbuf) == 0) &&
974 S_ISLNK(statbuf.st_mode))
975 (void) unlink(udevpath);
977 diskname = strrchr(devpath, '/');
978 assert(diskname != NULL);
980 if (zpool_label_disk(g_zfs, zhp, diskname) == -1)
984 * Now we've labeled the disk and the partitions have been
985 * created. We still need to wait for udev to create the
986 * symlinks to those partitions.
988 if ((ret = zpool_label_disk_wait(udevpath, 1000)) != 0) {
989 (void) fprintf(stderr,
990 gettext( "cannot resolve path '%s'\n"), udevpath);
995 * Update the path to refer to FIRST_SLICE. The presence of
996 * the 'whole_disk' field indicates to the CLI that we should
997 * chop off the slice number when displaying the device in
1000 verify(nvlist_add_string(nv, ZPOOL_CONFIG_PATH, udevpath) == 0);
1002 /* Just in case this partition already existed. */
1003 (void) zero_label(udevpath);
1008 for (c = 0; c < children; c++)
1009 if ((ret = make_disks(zhp, child[c])) != 0)
1012 if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_SPARES,
1013 &child, &children) == 0)
1014 for (c = 0; c < children; c++)
1015 if ((ret = make_disks(zhp, child[c])) != 0)
1018 if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_L2CACHE,
1019 &child, &children) == 0)
1020 for (c = 0; c < children; c++)
1021 if ((ret = make_disks(zhp, child[c])) != 0)
1028 * Determine if the given path is a hot spare within the given configuration.
1031 is_spare(nvlist_t *config, const char *path)
1037 uint64_t guid, spareguid;
1043 if ((fd = open(path, O_RDONLY|O_EXCL)) < 0)
1046 if (zpool_in_use(g_zfs, fd, &state, &name, &inuse) != 0 ||
1048 state != POOL_STATE_SPARE ||
1049 zpool_read_label(fd, &label) != 0) {
1057 verify(nvlist_lookup_uint64(label, ZPOOL_CONFIG_GUID, &guid) == 0);
1060 verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE,
1062 if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES,
1063 &spares, &nspares) == 0) {
1064 for (i = 0; i < nspares; i++) {
1065 verify(nvlist_lookup_uint64(spares[i],
1066 ZPOOL_CONFIG_GUID, &spareguid) == 0);
1067 if (spareguid == guid)
1076 * Go through and find any devices that are in use. We rely on libdiskmgt for
1077 * the majority of this task.
1080 check_in_use(nvlist_t *config, nvlist_t *nv, boolean_t force,
1081 boolean_t replacing, boolean_t isspare)
1087 char buf[MAXPATHLEN];
1088 uint64_t wholedisk = B_FALSE;
1090 verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) == 0);
1092 if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN,
1093 &child, &children) != 0) {
1095 verify(!nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path));
1096 if (strcmp(type, VDEV_TYPE_DISK) == 0)
1097 verify(!nvlist_lookup_uint64(nv,
1098 ZPOOL_CONFIG_WHOLE_DISK, &wholedisk));
1101 * As a generic check, we look to see if this is a replace of a
1102 * hot spare within the same pool. If so, we allow it
1103 * regardless of what libblkid or zpool_in_use() says.
1107 (void) snprintf(buf, sizeof (buf), "%ss0",
1110 (void) strlcpy(buf, path, sizeof (buf));
1112 if (is_spare(config, buf))
1116 if (strcmp(type, VDEV_TYPE_DISK) == 0)
1117 ret = check_device(path, force, isspare, wholedisk);
1119 if (strcmp(type, VDEV_TYPE_FILE) == 0)
1120 ret = check_file(path, force, isspare);
1125 for (c = 0; c < children; c++)
1126 if ((ret = check_in_use(config, child[c], force,
1127 replacing, B_FALSE)) != 0)
1130 if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_SPARES,
1131 &child, &children) == 0)
1132 for (c = 0; c < children; c++)
1133 if ((ret = check_in_use(config, child[c], force,
1134 replacing, B_TRUE)) != 0)
1137 if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_L2CACHE,
1138 &child, &children) == 0)
1139 for (c = 0; c < children; c++)
1140 if ((ret = check_in_use(config, child[c], force,
1141 replacing, B_FALSE)) != 0)
1148 is_grouping(const char *type, int *mindev, int *maxdev)
1150 if (strncmp(type, "raidz", 5) == 0) {
1151 const char *p = type + 5;
1157 } else if (*p == '0') {
1158 return (NULL); /* no zero prefixes allowed */
1161 nparity = strtol(p, &end, 10);
1162 if (errno != 0 || nparity < 1 || nparity >= 255 ||
1168 *mindev = nparity + 1;
1171 return (VDEV_TYPE_RAIDZ);
1177 if (strcmp(type, "mirror") == 0) {
1180 return (VDEV_TYPE_MIRROR);
1183 if (strcmp(type, "spare") == 0) {
1186 return (VDEV_TYPE_SPARE);
1189 if (strcmp(type, "log") == 0) {
1192 return (VDEV_TYPE_LOG);
1195 if (strcmp(type, "cache") == 0) {
1198 return (VDEV_TYPE_L2CACHE);
1205 * Construct a syntactically valid vdev specification,
1206 * and ensure that all devices and files exist and can be opened.
1207 * Note: we don't bother freeing anything in the error paths
1208 * because the program is just going to exit anyway.
1211 construct_spec(nvlist_t *props, int argc, char **argv)
1213 nvlist_t *nvroot, *nv, **top, **spares, **l2cache;
1214 int t, toplevels, mindev, maxdev, nspares, nlogs, nl2cache;
1217 boolean_t seen_logs;
1227 seen_logs = B_FALSE;
1233 * If it's a mirror or raidz, the subsequent arguments are
1234 * its leaves -- until we encounter the next mirror or raidz.
1236 if ((type = is_grouping(argv[0], &mindev, &maxdev)) != NULL) {
1237 nvlist_t **child = NULL;
1238 int c, children = 0;
1240 if (strcmp(type, VDEV_TYPE_SPARE) == 0) {
1241 if (spares != NULL) {
1242 (void) fprintf(stderr,
1243 gettext("invalid vdev "
1244 "specification: 'spare' can be "
1245 "specified only once\n"));
1251 if (strcmp(type, VDEV_TYPE_LOG) == 0) {
1253 (void) fprintf(stderr,
1254 gettext("invalid vdev "
1255 "specification: 'log' can be "
1256 "specified only once\n"));
1264 * A log is not a real grouping device.
1265 * We just set is_log and continue.
1270 if (strcmp(type, VDEV_TYPE_L2CACHE) == 0) {
1271 if (l2cache != NULL) {
1272 (void) fprintf(stderr,
1273 gettext("invalid vdev "
1274 "specification: 'cache' can be "
1275 "specified only once\n"));
1282 if (strcmp(type, VDEV_TYPE_MIRROR) != 0) {
1283 (void) fprintf(stderr,
1284 gettext("invalid vdev "
1285 "specification: unsupported 'log' "
1286 "device: %s\n"), type);
1292 for (c = 1; c < argc; c++) {
1293 if (is_grouping(argv[c], NULL, NULL) != NULL)
1296 child = realloc(child,
1297 children * sizeof (nvlist_t *));
1300 if ((nv = make_leaf_vdev(props, argv[c], B_FALSE))
1303 child[children - 1] = nv;
1306 if (children < mindev) {
1307 (void) fprintf(stderr, gettext("invalid vdev "
1308 "specification: %s requires at least %d "
1309 "devices\n"), argv[0], mindev);
1313 if (children > maxdev) {
1314 (void) fprintf(stderr, gettext("invalid vdev "
1315 "specification: %s supports no more than "
1316 "%d devices\n"), argv[0], maxdev);
1323 if (strcmp(type, VDEV_TYPE_SPARE) == 0) {
1327 } else if (strcmp(type, VDEV_TYPE_L2CACHE) == 0) {
1329 nl2cache = children;
1332 verify(nvlist_alloc(&nv, NV_UNIQUE_NAME,
1334 verify(nvlist_add_string(nv, ZPOOL_CONFIG_TYPE,
1336 verify(nvlist_add_uint64(nv,
1337 ZPOOL_CONFIG_IS_LOG, is_log) == 0);
1338 if (strcmp(type, VDEV_TYPE_RAIDZ) == 0) {
1339 verify(nvlist_add_uint64(nv,
1340 ZPOOL_CONFIG_NPARITY,
1343 verify(nvlist_add_nvlist_array(nv,
1344 ZPOOL_CONFIG_CHILDREN, child,
1347 for (c = 0; c < children; c++)
1348 nvlist_free(child[c]);
1353 * We have a device. Pass off to make_leaf_vdev() to
1354 * construct the appropriate nvlist describing the vdev.
1356 if ((nv = make_leaf_vdev(props, argv[0], is_log)) == NULL)
1365 top = realloc(top, toplevels * sizeof (nvlist_t *));
1368 top[toplevels - 1] = nv;
1371 if (toplevels == 0 && nspares == 0 && nl2cache == 0) {
1372 (void) fprintf(stderr, gettext("invalid vdev "
1373 "specification: at least one toplevel vdev must be "
1378 if (seen_logs && nlogs == 0) {
1379 (void) fprintf(stderr, gettext("invalid vdev specification: "
1380 "log requires at least 1 device\n"));
1385 * Finally, create nvroot and add all top-level vdevs to it.
1387 verify(nvlist_alloc(&nvroot, NV_UNIQUE_NAME, 0) == 0);
1388 verify(nvlist_add_string(nvroot, ZPOOL_CONFIG_TYPE,
1389 VDEV_TYPE_ROOT) == 0);
1390 verify(nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN,
1391 top, toplevels) == 0);
1393 verify(nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES,
1394 spares, nspares) == 0);
1396 verify(nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE,
1397 l2cache, nl2cache) == 0);
1399 for (t = 0; t < toplevels; t++)
1400 nvlist_free(top[t]);
1401 for (t = 0; t < nspares; t++)
1402 nvlist_free(spares[t]);
1403 for (t = 0; t < nl2cache; t++)
1404 nvlist_free(l2cache[t]);
1415 split_mirror_vdev(zpool_handle_t *zhp, char *newname, nvlist_t *props,
1416 splitflags_t flags, int argc, char **argv)
1418 nvlist_t *newroot = NULL, **child;
1422 if ((newroot = construct_spec(props, argc, argv)) == NULL) {
1423 (void) fprintf(stderr, gettext("Unable to build a "
1424 "pool from the specified devices\n"));
1428 if (!flags.dryrun && make_disks(zhp, newroot) != 0) {
1429 nvlist_free(newroot);
1433 /* avoid any tricks in the spec */
1434 verify(nvlist_lookup_nvlist_array(newroot,
1435 ZPOOL_CONFIG_CHILDREN, &child, &children) == 0);
1436 for (c = 0; c < children; c++) {
1441 verify(nvlist_lookup_string(child[c],
1442 ZPOOL_CONFIG_PATH, &path) == 0);
1443 if ((type = is_grouping(path, &min, &max)) != NULL) {
1444 (void) fprintf(stderr, gettext("Cannot use "
1445 "'%s' as a device for splitting\n"), type);
1446 nvlist_free(newroot);
1452 if (zpool_vdev_split(zhp, newname, &newroot, props, flags) != 0) {
1453 if (newroot != NULL)
1454 nvlist_free(newroot);
1462 * Get and validate the contents of the given vdev specification. This ensures
1463 * that the nvlist returned is well-formed, that all the devices exist, and that
1464 * they are not currently in use by any other known consumer. The 'poolconfig'
1465 * parameter is the current configuration of the pool when adding devices
1466 * existing pool, and is used to perform additional checks, such as changing the
1467 * replication level of the pool. It can be 'NULL' to indicate that this is a
1468 * new pool. The 'force' flag controls whether devices should be forcefully
1469 * added, even if they appear in use.
1472 make_root_vdev(zpool_handle_t *zhp, nvlist_t *props, int force, int check_rep,
1473 boolean_t replacing, boolean_t dryrun, int argc, char **argv)
1476 nvlist_t *poolconfig = NULL;
1480 * Construct the vdev specification. If this is successful, we know
1481 * that we have a valid specification, and that all devices can be
1484 if ((newroot = construct_spec(props, argc, argv)) == NULL)
1487 if (zhp && ((poolconfig = zpool_get_config(zhp, NULL)) == NULL))
1491 * Validate each device to make sure that its not shared with another
1492 * subsystem. We do this even if 'force' is set, because there are some
1493 * uses (such as a dedicated dump device) that even '-f' cannot
1496 if (check_in_use(poolconfig, newroot, force, replacing, B_FALSE) != 0) {
1497 nvlist_free(newroot);
1502 * Check the replication level of the given vdevs and report any errors
1503 * found. We include the existing pool spec, if any, as we need to
1504 * catch changes against the existing replication level.
1506 if (check_rep && check_replication(poolconfig, newroot) != 0) {
1507 nvlist_free(newroot);
1512 * Run through the vdev specification and label any whole disks found.
1514 if (!dryrun && make_disks(zhp, newroot) != 0) {
1515 nvlist_free(newroot);