lib/Makefile.in

   1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17 VPATH = @srcdir@
  18 pkgdatadir = $(datadir)/@PACKAGE@
  19 pkgincludedir = $(includedir)/@PACKAGE@
  20 pkglibdir = $(libdir)/@PACKAGE@
  21 pkglibexecdir = $(libexecdir)/@PACKAGE@
  22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  23 install_sh_DATA = $(install_sh) -c -m 644
  24 install_sh_PROGRAM = $(install_sh) -c
  25 install_sh_SCRIPT = $(install_sh) -c
  26 INSTALL_HEADER = $(INSTALL_DATA)
  27 transform = $(program_transform_name)
  28 NORMAL_INSTALL = :
  29 PRE_INSTALL = :
  30 POST_INSTALL = :
  31 NORMAL_UNINSTALL = :
  32 PRE_UNINSTALL = :
  33 POST_UNINSTALL = :
  34 build_triplet = @build@
  35 host_triplet = @host@
  36 target_triplet = @target@
  37 subdir = lib
  38 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
  39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  40 am__aclocal_m4_deps =  \
  41         $(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
  42         $(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
  43         $(top_srcdir)/config/kernel-bdev-logical-size.m4 \
  44         $(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
  45         $(top_srcdir)/config/kernel-bdi.m4 \
  46         $(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
  47         $(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
  48         $(top_srcdir)/config/kernel-bio-failfast.m4 \
  49         $(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
  50         $(top_srcdir)/config/kernel-blk-end-request.m4 \
  51         $(top_srcdir)/config/kernel-blk-fetch-request.m4 \
  52         $(top_srcdir)/config/kernel-blk-requeue-request.m4 \
  53         $(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
  54         $(top_srcdir)/config/kernel-blk-rq-pos.m4 \
  55         $(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
  56         $(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
  57         $(top_srcdir)/config/kernel-check-disk-size-change.m4 \
  58         $(top_srcdir)/config/kernel-d-obtain-alias.m4 \
  59         $(top_srcdir)/config/kernel-evict-inode.m4 \
  60         $(top_srcdir)/config/kernel-fmode-t.m4 \
  61         $(top_srcdir)/config/kernel-fsync.m4 \
  62         $(top_srcdir)/config/kernel-get-disk-ro.m4 \
  63         $(top_srcdir)/config/kernel-insert-inode-locked.m4 \
  64         $(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
  65         $(top_srcdir)/config/kernel-kobj-name-len.m4 \
  66         $(top_srcdir)/config/kernel-mount-nodev.m4 \
  67         $(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
  68         $(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
  69         $(top_srcdir)/config/kernel-rq-is_sync.m4 \
  70         $(top_srcdir)/config/kernel-security-inode-init.m4 \
  71         $(top_srcdir)/config/kernel-truncate-setsize.m4 \
  72         $(top_srcdir)/config/kernel-xattr-handler.m4 \
  73         $(top_srcdir)/config/kernel.m4 \
  74         $(top_srcdir)/config/user-arch.m4 \
  75         $(top_srcdir)/config/user-frame-larger-than.m4 \
  76         $(top_srcdir)/config/user-ioctl.m4 \
  77         $(top_srcdir)/config/user-libblkid.m4 \
  78         $(top_srcdir)/config/user-libuuid.m4 \
  79         $(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
  80         $(top_srcdir)/config/user-selinux.m4 \
  81         $(top_srcdir)/config/user-udev.m4 \
  82         $(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
  83         $(top_srcdir)/config/zfs-build.m4 \
  84         $(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
  85 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  86         $(ACLOCAL_M4)
  87 mkinstalldirs = $(install_sh) -d
  88 CONFIG_HEADER = $(top_builddir)/zfs_config.h
  89 CONFIG_CLEAN_FILES =
  90 CONFIG_CLEAN_VPATH_FILES =
  91 AM_V_GEN = $(am__v_GEN_$(V))
  92 am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
  93 am__v_GEN_0 = @echo "  GEN   " $@;
  94 AM_V_at = $(am__v_at_$(V))
  95 am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
  96 am__v_at_0 = @
  97 SOURCES =
  98 DIST_SOURCES =
  99 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 100         html-recursive info-recursive install-data-recursive \
 101         install-dvi-recursive install-exec-recursive \
 102         install-html-recursive install-info-recursive \
 103         install-pdf-recursive install-ps-recursive install-recursive \
 104         installcheck-recursive installdirs-recursive pdf-recursive \
 105         ps-recursive uninstall-recursive
 106 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 107   distclean-recursive maintainer-clean-recursive
 108 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 109         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
 110         distdir
 111 ETAGS = etags
 112 CTAGS = ctags
 113 DIST_SUBDIRS = $(SUBDIRS)
 114 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 115 am__relativize = \
 116   dir0=`pwd`; \
 117   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 118   sed_rest='s,^[^/]*/*,,'; \
 119   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 120   sed_butlast='s,/*[^/]*$$,,'; \
 121   while test -n "$$dir1"; do \
 122     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 123     if test "$$first" != "."; then \
 124       if test "$$first" = ".."; then \
 125         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 126         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 127       else \
 128         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 129         if test "$$first2" = "$$first"; then \
 130           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 131         else \
 132           dir2="../$$dir2"; \
 133         fi; \
 134         dir0="$$dir0"/"$$first"; \
 135       fi; \
 136     fi; \
 137     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 138   done; \
 139   reldir="$$dir2"
 140 ACLOCAL = @ACLOCAL@
 141 ALIEN = @ALIEN@
 142 ALIEN_VERSION = @ALIEN_VERSION@
 143 AMTAR = @AMTAR@
 144 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 145 AR = @AR@
 146 AUTOCONF = @AUTOCONF@
 147 AUTOHEADER = @AUTOHEADER@
 148 AUTOMAKE = @AUTOMAKE@
 149 AWK = @AWK@
 150 CC = @CC@
 151 CCAS = @CCAS@
 152 CCASDEPMODE = @CCASDEPMODE@
 153 CCASFLAGS = @CCASFLAGS@
 154 CCDEPMODE = @CCDEPMODE@
 155 CFLAGS = @CFLAGS@
 156 CPP = @CPP@
 157 CPPFLAGS = @CPPFLAGS@
 158 CYGPATH_W = @CYGPATH_W@
 159 DEBUG_CFLAGS = @DEBUG_CFLAGS@
 160 DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
 161 DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
 162 DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
 163 DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
 164 DEFS = @DEFS@
 165 DEPDIR = @DEPDIR@
 166 DPKG = @DPKG@
 167 DPKGBUILD = @DPKGBUILD@
 168 DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
 169 DPKG_VERSION = @DPKG_VERSION@
 170 DSYMUTIL = @DSYMUTIL@
 171 DUMPBIN = @DUMPBIN@
 172 ECHO_C = @ECHO_C@
 173 ECHO_N = @ECHO_N@
 174 ECHO_T = @ECHO_T@
 175 EGREP = @EGREP@
 176 EXEEXT = @EXEEXT@
 177 FGREP = @FGREP@
 178 FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
 179 GREP = @GREP@
 180 HAVE_ALIEN = @HAVE_ALIEN@
 181 HAVE_DPKG = @HAVE_DPKG@
 182 HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
 183 HAVE_RPM = @HAVE_RPM@
 184 HAVE_RPMBUILD = @HAVE_RPMBUILD@
 185 INSTALL = @INSTALL@
 186 INSTALL_DATA = @INSTALL_DATA@
 187 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 188 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 189 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 190 KERNELCPPFLAGS = @KERNELCPPFLAGS@
 191 KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
 192 LD = @LD@
 193 LDFLAGS = @LDFLAGS@
 194 LIBBLKID = @LIBBLKID@
 195 LIBOBJS = @LIBOBJS@
 196 LIBS = @LIBS@
 197 LIBSELINUX = @LIBSELINUX@
 198 LIBTOOL = @LIBTOOL@
 199 LIBUUID = @LIBUUID@
 200 LINUX = @LINUX@
 201 LINUX_OBJ = @LINUX_OBJ@
 202 LINUX_SYMBOLS = @LINUX_SYMBOLS@
 203 LINUX_VERSION = @LINUX_VERSION@
 204 LIPO = @LIPO@
 205 LN_S = @LN_S@
 206 LTLIBOBJS = @LTLIBOBJS@
 207 MAINT = @MAINT@
 208 MAKEINFO = @MAKEINFO@
 209 MKDIR_P = @MKDIR_P@
 210 NM = @NM@
 211 NMEDIT = @NMEDIT@
 212 NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
 213 OBJDUMP = @OBJDUMP@
 214 OBJEXT = @OBJEXT@
 215 OTOOL = @OTOOL@
 216 OTOOL64 = @OTOOL64@
 217 PACKAGE = @PACKAGE@
 218 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 219 PACKAGE_NAME = @PACKAGE_NAME@
 220 PACKAGE_STRING = @PACKAGE_STRING@
 221 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 222 PACKAGE_VERSION = @PACKAGE_VERSION@
 223 PATH_SEPARATOR = @PATH_SEPARATOR@
 224 RANLIB = @RANLIB@
 225 RPM = @RPM@
 226 RPMBUILD = @RPMBUILD@
 227 RPMBUILD_VERSION = @RPMBUILD_VERSION@
 228 RPM_VERSION = @RPM_VERSION@
 229 SED = @SED@
 230 SET_MAKE = @SET_MAKE@
 231 SHELL = @SHELL@
 232 SPL = @SPL@
 233 SPL_OBJ = @SPL_OBJ@
 234 SPL_SYMBOLS = @SPL_SYMBOLS@
 235 SPL_VERSION = @SPL_VERSION@
 236 STRIP = @STRIP@
 237 TARGET_ASM_DIR = @TARGET_ASM_DIR@
 238 VENDOR = @VENDOR@
 239 VERSION = @VERSION@
 240 ZFS_CONFIG = @ZFS_CONFIG@
 241 ZFS_META_ALIAS = @ZFS_META_ALIAS@
 242 ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
 243 ZFS_META_DATA = @ZFS_META_DATA@
 244 ZFS_META_LICENSE = @ZFS_META_LICENSE@
 245 ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
 246 ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
 247 ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
 248 ZFS_META_NAME = @ZFS_META_NAME@
 249 ZFS_META_RELEASE = @ZFS_META_RELEASE@
 250 ZFS_META_VERSION = @ZFS_META_VERSION@
 251 ZLIB = @ZLIB@
 252 abs_builddir = @abs_builddir@
 253 abs_srcdir = @abs_srcdir@
 254 abs_top_builddir = @abs_top_builddir@
 255 abs_top_srcdir = @abs_top_srcdir@
 256 ac_ct_CC = @ac_ct_CC@
 257 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 258 am__include = @am__include@
 259 am__leading_dot = @am__leading_dot@
 260 am__quote = @am__quote@
 261 am__tar = @am__tar@
 262 am__untar = @am__untar@
 263 bindir = @bindir@
 264 build = @build@
 265 build_alias = @build_alias@
 266 build_cpu = @build_cpu@
 267 build_os = @build_os@
 268 build_vendor = @build_vendor@
 269 builddir = @builddir@
 270 datadir = @datadir@
 271 datarootdir = @datarootdir@
 272 docdir = @docdir@
 273 dvidir = @dvidir@
 274 exec_prefix = @exec_prefix@
 275 host = @host@
 276 host_alias = @host_alias@
 277 host_cpu = @host_cpu@
 278 host_os = @host_os@
 279 host_vendor = @host_vendor@
 280 htmldir = @htmldir@
 281 includedir = @includedir@
 282 infodir = @infodir@
 283 install_sh = @install_sh@
 284 libdir = @libdir@
 285 libexecdir = @libexecdir@
 286 localedir = @localedir@
 287 localstatedir = @localstatedir@
 288 lt_ECHO = @lt_ECHO@
 289 mandir = @mandir@
 290 mkdir_p = @mkdir_p@
 291 oldincludedir = @oldincludedir@
 292 pdfdir = @pdfdir@
 293 prefix = @prefix@
 294 program_transform_name = @program_transform_name@
 295 psdir = @psdir@
 296 sbindir = @sbindir@
 297 sharedstatedir = @sharedstatedir@
 298 srcdir = @srcdir@
 299 sysconfdir = @sysconfdir@
 300 target = @target@
 301 target_alias = @target_alias@
 302 target_cpu = @target_cpu@
 303 target_os = @target_os@
 304 target_vendor = @target_vendor@
 305 top_build_prefix = @top_build_prefix@
 306 top_builddir = @top_builddir@
 307 top_srcdir = @top_srcdir@
 308 udevdir = @udevdir@
 309 udevruledir = @udevruledir@
 310 SUBDIRS = libspl libavl libefi libnvpair libshare libunicode libuutil \
 311         libzpool libzfs
 312 all: all-recursive
 313
 314 .SUFFIXES:
 315 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 316         @for dep in $?; do \
 317           case '$(am__configure_deps)' in \
 318             *$$dep*) \
 319               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 320                 && { if test -f $@; then exit 0; else break; fi; }; \
 321               exit 1;; \
 322           esac; \
 323         done; \
 324         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \
 325         $(am__cd) $(top_srcdir) && \
 326           $(AUTOMAKE) --gnu lib/Makefile
 327 .PRECIOUS: Makefile
 328 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 329         @case '$?' in \
 330           *config.status*) \
 331             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 332           *) \
 333             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 334             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 335         esac;
 336
 337 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 338         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 339
 340 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 341         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 342 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 343         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 344 $(am__aclocal_m4_deps):
 345
 346 mostlyclean-libtool:
 347         -rm -f *.lo
 348
 349 clean-libtool:
 350         -rm -rf .libs _libs
 351
 352 # This directory's subdirectories are mostly independent; you can cd
 353 # into them and run `make' without going through this Makefile.
 354 # To change the values of `make' variables: instead of editing Makefiles,
 355 # (1) if the variable is set in `config.status', edit `config.status'
 356 #     (which will cause the Makefiles to be regenerated when you run `make');
 357 # (2) otherwise, pass the desired values on the `make' command line.
 358 $(RECURSIVE_TARGETS):
 359         @fail= failcom='exit 1'; \
 360         for f in x $$MAKEFLAGS; do \
 361           case $$f in \
 362             *=* | --[!k]*);; \
 363             *k*) failcom='fail=yes';; \
 364           esac; \
 365         done; \
 366         dot_seen=no; \
 367         target=`echo $@ | sed s/-recursive//`; \
 368         list='$(SUBDIRS)'; for subdir in $$list; do \
 369           echo "Making $$target in $$subdir"; \
 370           if test "$$subdir" = "."; then \
 371             dot_seen=yes; \
 372             local_target="$$target-am"; \
 373           else \
 374             local_target="$$target"; \
 375           fi; \
 376           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 377           || eval $$failcom; \
 378         done; \
 379         if test "$$dot_seen" = "no"; then \
 380           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 381         fi; test -z "$$fail"
 382
 383 $(RECURSIVE_CLEAN_TARGETS):
 384         @fail= failcom='exit 1'; \
 385         for f in x $$MAKEFLAGS; do \
 386           case $$f in \
 387             *=* | --[!k]*);; \
 388             *k*) failcom='fail=yes';; \
 389           esac; \
 390         done; \
 391         dot_seen=no; \
 392         case "$@" in \
 393           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 394           *) list='$(SUBDIRS)' ;; \
 395         esac; \
 396         rev=''; for subdir in $$list; do \
 397           if test "$$subdir" = "."; then :; else \
 398             rev="$$subdir $$rev"; \
 399           fi; \
 400         done; \
 401         rev="$$rev ."; \
 402         target=`echo $@ | sed s/-recursive//`; \
 403         for subdir in $$rev; do \
 404           echo "Making $$target in $$subdir"; \
 405           if test "$$subdir" = "."; then \
 406             local_target="$$target-am"; \
 407           else \
 408             local_target="$$target"; \
 409           fi; \
 410           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 411           || eval $$failcom; \
 412         done && test -z "$$fail"
 413 tags-recursive:
 414         list='$(SUBDIRS)'; for subdir in $$list; do \
 415           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 416         done
 417 ctags-recursive:
 418         list='$(SUBDIRS)'; for subdir in $$list; do \
 419           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 420         done
 421
 422 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 423         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 424         unique=`for i in $$list; do \
 425             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 426           done | \
 427           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 428               END { if (nonempty) { for (i in files) print i; }; }'`; \
 429         mkid -fID $$unique
 430 tags: TAGS
 431
 432 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 433                 $(TAGS_FILES) $(LISP)
 434         set x; \
 435         here=`pwd`; \
 436         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 437           include_option=--etags-include; \
 438           empty_fix=.; \
 439         else \
 440           include_option=--include; \
 441           empty_fix=; \
 442         fi; \
 443         list='$(SUBDIRS)'; for subdir in $$list; do \
 444           if test "$$subdir" = .; then :; else \
 445             test ! -f $$subdir/TAGS || \
 446               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 447           fi; \
 448         done; \
 449         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 450         unique=`for i in $$list; do \
 451             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 452           done | \
 453           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 454               END { if (nonempty) { for (i in files) print i; }; }'`; \
 455         shift; \
 456         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 457           test -n "$$unique" || unique=$$empty_fix; \
 458           if test $$# -gt 0; then \
 459             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 460               "$$@" $$unique; \
 461           else \
 462             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 463               $$unique; \
 464           fi; \
 465         fi
 466 ctags: CTAGS
 467 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 468                 $(TAGS_FILES) $(LISP)
 469         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 470         unique=`for i in $$list; do \
 471             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 472           done | \
 473           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 474               END { if (nonempty) { for (i in files) print i; }; }'`; \
 475         test -z "$(CTAGS_ARGS)$$unique" \
 476           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 477              $$unique
 478
 479 GTAGS:
 480         here=`$(am__cd) $(top_builddir) && pwd` \
 481           && $(am__cd) $(top_srcdir) \
 482           && gtags -i $(GTAGS_ARGS) "$$here"
 483
 484 distclean-tags:
 485         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 486
 487 distdir: $(DISTFILES)
 488         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 489         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 490         list='$(DISTFILES)'; \
 491           dist_files=`for file in $$list; do echo $$file; done | \
 492           sed -e "s|^$$srcdirstrip/||;t" \
 493               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 494         case $$dist_files in \
 495           */*) $(MKDIR_P) `echo "$$dist_files" | \
 496                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 497                            sort -u` ;; \
 498         esac; \
 499         for file in $$dist_files; do \
 500           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 501           if test -d $$d/$$file; then \
 502             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 503             if test -d "$(distdir)/$$file"; then \
 504               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 505             fi; \
 506             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 507               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 508               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 509             fi; \
 510             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 511           else \
 512             test -f "$(distdir)/$$file" \
 513             || cp -p $$d/$$file "$(distdir)/$$file" \
 514             || exit 1; \
 515           fi; \
 516         done
 517         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 518           if test "$$subdir" = .; then :; else \
 519             test -d "$(distdir)/$$subdir" \
 520             || $(MKDIR_P) "$(distdir)/$$subdir" \
 521             || exit 1; \
 522           fi; \
 523         done
 524         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 525           if test "$$subdir" = .; then :; else \
 526             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 527             $(am__relativize); \
 528             new_distdir=$$reldir; \
 529             dir1=$$subdir; dir2="$(top_distdir)"; \
 530             $(am__relativize); \
 531             new_top_distdir=$$reldir; \
 532             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 533             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 534             ($(am__cd) $$subdir && \
 535               $(MAKE) $(AM_MAKEFLAGS) \
 536                 top_distdir="$$new_top_distdir" \
 537                 distdir="$$new_distdir" \
 538                 am__remove_distdir=: \
 539                 am__skip_length_check=: \
 540                 am__skip_mode_fix=: \
 541                 distdir) \
 542               || exit 1; \
 543           fi; \
 544         done
 545 check-am: all-am
 546 check: check-recursive
 547 all-am: Makefile
 548 installdirs: installdirs-recursive
 549 installdirs-am:
 550 install: install-recursive
 551 install-exec: install-exec-recursive
 552 install-data: install-data-recursive
 553 uninstall: uninstall-recursive
 554
 555 install-am: all-am
 556         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 557
 558 installcheck: installcheck-recursive
 559 install-strip:
 560         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 561           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 562           `test -z '$(STRIP)' || \
 563             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 564 mostlyclean-generic:
 565
 566 clean-generic:
 567
 568 distclean-generic:
 569         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 570         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 571
 572 maintainer-clean-generic:
 573         @echo "This command is intended for maintainers to use"
 574         @echo "it deletes files that may require special tools to rebuild."
 575 clean: clean-recursive
 576
 577 clean-am: clean-generic clean-libtool mostlyclean-am
 578
 579 distclean: distclean-recursive
 580         -rm -f Makefile
 581 distclean-am: clean-am distclean-generic distclean-tags
 582
 583 dvi: dvi-recursive
 584
 585 dvi-am:
 586
 587 html: html-recursive
 588
 589 html-am:
 590
 591 info: info-recursive
 592
 593 info-am:
 594
 595 install-data-am:
 596
 597 install-dvi: install-dvi-recursive
 598
 599 install-dvi-am:
 600
 601 install-exec-am:
 602
 603 install-html: install-html-recursive
 604
 605 install-html-am:
 606
 607 install-info: install-info-recursive
 608
 609 install-info-am:
 610
 611 install-man:
 612
 613 install-pdf: install-pdf-recursive
 614
 615 install-pdf-am:
 616
 617 install-ps: install-ps-recursive
 618
 619 install-ps-am:
 620
 621 installcheck-am:
 622
 623 maintainer-clean: maintainer-clean-recursive
 624         -rm -f Makefile
 625 maintainer-clean-am: distclean-am maintainer-clean-generic
 626
 627 mostlyclean: mostlyclean-recursive
 628
 629 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 630
 631 pdf: pdf-recursive
 632
 633 pdf-am:
 634
 635 ps: ps-recursive
 636
 637 ps-am:
 638
 639 uninstall-am:
 640
 641 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
 642         install-am install-strip tags-recursive
 643
 644 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 645         all all-am check check-am clean clean-generic clean-libtool \
 646         ctags ctags-recursive distclean distclean-generic \
 647         distclean-libtool distclean-tags distdir dvi dvi-am html \
 648         html-am info info-am install install-am install-data \
 649         install-data-am install-dvi install-dvi-am install-exec \
 650         install-exec-am install-html install-html-am install-info \
 651         install-info-am install-man install-pdf install-pdf-am \
 652         install-ps install-ps-am install-strip installcheck \
 653         installcheck-am installdirs installdirs-am maintainer-clean \
 654         maintainer-clean-generic mostlyclean mostlyclean-generic \
 655         mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 656         uninstall uninstall-am
 657
 658
 659 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 660 # Otherwise a system limit (for SysV at least) may be exceeded.
 661 .NOEXPORT: