--- /dev/null
+/*
+ * CDDL HEADER START
+ *
+ * The contents of this file are subject to the terms of the
+ * Common Development and Distribution License (the "License").
+ * You may not use this file except in compliance with the License.
+ *
+ * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+ * or http://www.opensolaris.org/os/licensing.
+ * See the License for the specific language governing permissions
+ * and limitations under the License.
+ *
+ * When distributing Covered Code, include this CDDL HEADER in each
+ * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+ * If applicable, add the following below this CDDL HEADER, with the
+ * fields enclosed by brackets "[]" replaced with your own identifying
+ * information: Portions Copyright [yyyy] [name of copyright owner]
+ *
+ * CDDL HEADER END
+ */
+
+/*
+ * Copyright 2009 Sun Microsystems, Inc. All rights reserved.
+ * Use is subject to license terms.
+ */
+
+#include <dlfcn.h>
+#include <errno.h>
+#include <libintl.h>
+#include <link.h>
+#include <pthread.h>
+#include <strings.h>
+#include <unistd.h>
+
+#include <libzfs.h>
+
+#include <fm/libtopo.h>
+#include <sys/fm/protocol.h>
+#include <sys/systeminfo.h>
+
+#include "libzfs_impl.h"
+
+/*
+ * This file is responsible for determining the relationship between I/O
+ * devices paths and physical locations. In the world of MPxIO and external
+ * enclosures, the device path is not synonymous with the physical location.
+ * If you remove a drive and insert it into a different slot, it will end up
+ * with the same path under MPxIO. If you recable storage enclosures, the
+ * device paths may change. All of this makes it difficult to implement the
+ * 'autoreplace' property, which is supposed to automatically manage disk
+ * replacement based on physical slot.
+ *
+ * In order to work around these limitations, we have a per-vdev FRU property
+ * that is the libtopo path (minus disk-specific authority information) to the
+ * physical location of the device on the system. This is an optional
+ * property, and is only needed when using the 'autoreplace' property or when
+ * generating FMA faults against vdevs.
+ */
+
+/*
+ * Because the FMA packages depend on ZFS, we have to dlopen() libtopo in case
+ * it is not present. We only need this once per library instance, so it is
+ * not part of the libzfs handle.
+ */
+static void *_topo_dlhandle;
+static topo_hdl_t *(*_topo_open)(int, const char *, int *);
+static void (*_topo_close)(topo_hdl_t *);
+static char *(*_topo_snap_hold)(topo_hdl_t *, const char *, int *);
+static void (*_topo_snap_release)(topo_hdl_t *);
+static topo_walk_t *(*_topo_walk_init)(topo_hdl_t *, const char *,
+ topo_walk_cb_t, void *, int *);
+static int (*_topo_walk_step)(topo_walk_t *, int);
+static void (*_topo_walk_fini)(topo_walk_t *);
+static void (*_topo_hdl_strfree)(topo_hdl_t *, char *);
+static char *(*_topo_node_name)(tnode_t *);
+static int (*_topo_prop_get_string)(tnode_t *, const char *, const char *,
+ char **, int *);
+static int (*_topo_node_fru)(tnode_t *, nvlist_t **, nvlist_t *, int *);
+static int (*_topo_fmri_nvl2str)(topo_hdl_t *, nvlist_t *, char **, int *);
+static int (*_topo_fmri_strcmp_noauth)(topo_hdl_t *, const char *,
+ const char *);
+
+#define ZFS_FRU_HASH_SIZE 257
+
+static size_t
+fru_strhash(const char *key)
+{
+ ulong_t g, h = 0;
+ const char *p;
+
+ for (p = key; *p != '\0'; p++) {
+ h = (h << 4) + *p;
+
+ if ((g = (h & 0xf0000000)) != 0) {
+ h ^= (g >> 24);
+ h ^= g;
+ }
+ }
+
+ return (h % ZFS_FRU_HASH_SIZE);
+}
+
+static int
+libzfs_fru_gather(topo_hdl_t *thp, tnode_t *tn, void *arg)
+{
+ libzfs_handle_t *hdl = arg;
+ nvlist_t *fru;
+ char *devpath, *frustr;
+ int err;
+ libzfs_fru_t *frup;
+ size_t idx;
+
+ /*
+ * If this is the chassis node, and we don't yet have the system
+ * chassis ID, then fill in this value now.
+ */
+ if (hdl->libzfs_chassis_id[0] == '\0' &&
+ strcmp(_topo_node_name(tn), "chassis") == 0) {
+ if (_topo_prop_get_string(tn, FM_FMRI_AUTHORITY,
+ FM_FMRI_AUTH_CHASSIS, &devpath, &err) == 0)
+ (void) strlcpy(hdl->libzfs_chassis_id, devpath,
+ sizeof (hdl->libzfs_chassis_id));
+ }
+
+ /*
+ * Skip non-disk nodes.
+ */
+ if (strcmp(_topo_node_name(tn), "disk") != 0)
+ return (TOPO_WALK_NEXT);
+
+ /*
+ * Get the devfs path and FRU.
+ */
+ if (_topo_prop_get_string(tn, "io", "devfs-path", &devpath, &err) != 0)
+ return (TOPO_WALK_NEXT);
+
+ if (libzfs_fru_lookup(hdl, devpath) != NULL) {
+ _topo_hdl_strfree(thp, devpath);
+ return (TOPO_WALK_NEXT);
+ }
+
+ if (_topo_node_fru(tn, &fru, NULL, &err) != 0) {
+ _topo_hdl_strfree(thp, devpath);
+ return (TOPO_WALK_NEXT);
+ }
+
+ /*
+ * Convert the FRU into a string.
+ */
+ if (_topo_fmri_nvl2str(thp, fru, &frustr, &err) != 0) {
+ nvlist_free(fru);
+ _topo_hdl_strfree(thp, devpath);
+ return (TOPO_WALK_NEXT);
+ }
+
+ nvlist_free(fru);
+
+ /*
+ * Finally, we have a FRU string and device path. Add it to the hash.
+ */
+ if ((frup = calloc(sizeof (libzfs_fru_t), 1)) == NULL) {
+ _topo_hdl_strfree(thp, devpath);
+ _topo_hdl_strfree(thp, frustr);
+ return (TOPO_WALK_NEXT);
+ }
+
+ if ((frup->zf_device = strdup(devpath)) == NULL ||
+ (frup->zf_fru = strdup(frustr)) == NULL) {
+ free(frup->zf_device);
+ free(frup);
+ _topo_hdl_strfree(thp, devpath);
+ _topo_hdl_strfree(thp, frustr);
+ return (TOPO_WALK_NEXT);
+ }
+
+ _topo_hdl_strfree(thp, devpath);
+ _topo_hdl_strfree(thp, frustr);
+
+ idx = fru_strhash(frup->zf_device);
+ frup->zf_chain = hdl->libzfs_fru_hash[idx];
+ hdl->libzfs_fru_hash[idx] = frup;
+ frup->zf_next = hdl->libzfs_fru_list;
+ hdl->libzfs_fru_list = frup;
+
+ return (TOPO_WALK_NEXT);
+}
+
+/*
+ * Called during initialization to setup the dynamic libtopo connection.
+ */
+#pragma init(libzfs_init_fru)
+static void
+libzfs_init_fru(void)
+{
+ char path[MAXPATHLEN];
+ char isa[257];
+
+#if defined(_LP64)
+ if (sysinfo(SI_ARCHITECTURE_64, isa, sizeof (isa)) < 0)
+ isa[0] = '\0';
+#else
+ isa[0] = '\0';
+#endif
+ (void) snprintf(path, sizeof (path),
+ "/usr/lib/fm/%s/libtopo.so", isa);
+
+ if ((_topo_dlhandle = dlopen(path, RTLD_LAZY)) == NULL)
+ return;
+
+ _topo_open = (topo_hdl_t *(*)())
+ dlsym(_topo_dlhandle, "topo_open");
+ _topo_close = (void (*)())
+ dlsym(_topo_dlhandle, "topo_close");
+ _topo_snap_hold = (char *(*)())
+ dlsym(_topo_dlhandle, "topo_snap_hold");
+ _topo_snap_release = (void (*)())
+ dlsym(_topo_dlhandle, "topo_snap_release");
+ _topo_walk_init = (topo_walk_t *(*)())
+ dlsym(_topo_dlhandle, "topo_walk_init");
+ _topo_walk_step = (int (*)())
+ dlsym(_topo_dlhandle, "topo_walk_step");
+ _topo_walk_fini = (void (*)())
+ dlsym(_topo_dlhandle, "topo_walk_fini");
+ _topo_hdl_strfree = (void (*)())
+ dlsym(_topo_dlhandle, "topo_hdl_strfree");
+ _topo_node_name = (char *(*)())
+ dlsym(_topo_dlhandle, "topo_node_name");
+ _topo_prop_get_string = (int (*)())
+ dlsym(_topo_dlhandle, "topo_prop_get_string");
+ _topo_node_fru = (int (*)())
+ dlsym(_topo_dlhandle, "topo_node_fru");
+ _topo_fmri_nvl2str = (int (*)())
+ dlsym(_topo_dlhandle, "topo_fmri_nvl2str");
+ _topo_fmri_strcmp_noauth = (int (*)())
+ dlsym(_topo_dlhandle, "topo_fmri_strcmp_noauth");
+
+ if (_topo_open == NULL || _topo_close == NULL ||
+ _topo_snap_hold == NULL || _topo_snap_release == NULL ||
+ _topo_walk_init == NULL || _topo_walk_step == NULL ||
+ _topo_walk_fini == NULL || _topo_hdl_strfree == NULL ||
+ _topo_node_name == NULL || _topo_prop_get_string == NULL ||
+ _topo_node_fru == NULL || _topo_fmri_nvl2str == NULL ||
+ _topo_fmri_strcmp_noauth == NULL) {
+ (void) dlclose(_topo_dlhandle);
+ _topo_dlhandle = NULL;
+ }
+}
+
+/*
+ * Refresh the mappings from device path -> FMRI. We do this by walking the
+ * hc topology looking for disk nodes, and recording the io/devfs-path and FRU.
+ * Note that we strip out the disk-specific authority information (serial,
+ * part, revision, etc) so that we are left with only the identifying
+ * characteristics of the slot (hc path and chassis-id).
+ */
+void
+libzfs_fru_refresh(libzfs_handle_t *hdl)
+{
+ int err;
+ char *uuid;
+ topo_hdl_t *thp;
+ topo_walk_t *twp;
+
+ if (_topo_dlhandle == NULL)
+ return;
+
+ /*
+ * Clear the FRU hash and initialize our basic structures.
+ */
+ libzfs_fru_clear(hdl, B_FALSE);
+
+ if ((hdl->libzfs_topo_hdl = _topo_open(TOPO_VERSION,
+ NULL, &err)) == NULL)
+ return;
+
+ thp = hdl->libzfs_topo_hdl;
+
+ if ((uuid = _topo_snap_hold(thp, NULL, &err)) == NULL)
+ return;
+
+ _topo_hdl_strfree(thp, uuid);
+
+ if (hdl->libzfs_fru_hash == NULL &&
+ (hdl->libzfs_fru_hash =
+ calloc(ZFS_FRU_HASH_SIZE * sizeof (void *), 1)) == NULL)
+ return;
+
+ /*
+ * We now have a topo snapshot, so iterate over the hc topology looking
+ * for disks to add to the hash.
+ */
+ twp = _topo_walk_init(thp, FM_FMRI_SCHEME_HC,
+ libzfs_fru_gather, hdl, &err);
+ if (twp != NULL) {
+ (void) _topo_walk_step(twp, TOPO_WALK_CHILD);
+ _topo_walk_fini(twp);
+ }
+}
+
+/*
+ * Given a devfs path, return the FRU for the device, if known. This will
+ * automatically call libzfs_fru_refresh() if it hasn't already been called by
+ * the consumer. The string returned is valid until the next call to
+ * libzfs_fru_refresh().
+ */
+const char *
+libzfs_fru_lookup(libzfs_handle_t *hdl, const char *devpath)
+{
+ size_t idx = fru_strhash(devpath);
+ libzfs_fru_t *frup;
+
+ if (hdl->libzfs_fru_hash == NULL)
+ libzfs_fru_refresh(hdl);
+
+ if (hdl->libzfs_fru_hash == NULL)
+ return (NULL);
+
+ for (frup = hdl->libzfs_fru_hash[idx]; frup != NULL;
+ frup = frup->zf_chain) {
+ if (strcmp(devpath, frup->zf_device) == 0)
+ return (frup->zf_fru);
+ }
+
+ return (NULL);
+}
+
+/*
+ * Given a fru path, return the device path. This will automatically call
+ * libzfs_fru_refresh() if it hasn't already been called by the consumer. The
+ * string returned is valid until the next call to libzfs_fru_refresh().
+ */
+const char *
+libzfs_fru_devpath(libzfs_handle_t *hdl, const char *fru)
+{
+ libzfs_fru_t *frup;
+ size_t idx;
+
+ if (hdl->libzfs_fru_hash == NULL)
+ libzfs_fru_refresh(hdl);
+
+ if (hdl->libzfs_fru_hash == NULL)
+ return (NULL);
+
+ for (idx = 0; idx < ZFS_FRU_HASH_SIZE; idx++) {
+ for (frup = hdl->libzfs_fru_hash[idx]; frup != NULL;
+ frup = frup->zf_next) {
+ if (_topo_fmri_strcmp_noauth(hdl->libzfs_topo_hdl,
+ fru, frup->zf_fru))
+ return (frup->zf_device);
+ }
+ }
+
+ return (NULL);
+}
+
+/*
+ * Change the stored FRU for the given vdev.
+ */
+int
+zpool_fru_set(zpool_handle_t *zhp, uint64_t vdev_guid, const char *fru)
+{
+ zfs_cmd_t zc = { 0 };
+
+ (void) strncpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name));
+ (void) strncpy(zc.zc_value, fru, sizeof (zc.zc_value));
+ zc.zc_guid = vdev_guid;
+
+ if (zfs_ioctl(zhp->zpool_hdl, ZFS_IOC_VDEV_SETFRU, &zc) != 0)
+ return (zpool_standard_error_fmt(zhp->zpool_hdl, errno,
+ dgettext(TEXT_DOMAIN, "cannot set FRU")));
+
+ return (0);
+}
+
+/*
+ * Compare to two FRUs, ignoring any authority information.
+ */
+boolean_t
+libzfs_fru_compare(libzfs_handle_t *hdl, const char *a, const char *b)
+{
+ if (hdl->libzfs_fru_hash == NULL)
+ libzfs_fru_refresh(hdl);
+
+ if (hdl->libzfs_fru_hash == NULL)
+ return (strcmp(a, b) == 0);
+
+ return (_topo_fmri_strcmp_noauth(hdl->libzfs_topo_hdl, a, b));
+}
+
+/*
+ * This special function checks to see whether the FRU indicates it's supposed
+ * to be in the system chassis, but the chassis-id doesn't match. This can
+ * happen in a clustered case, where both head nodes have the same logical
+ * disk, but opening the device on the other head node is meaningless.
+ */
+boolean_t
+libzfs_fru_notself(libzfs_handle_t *hdl, const char *fru)
+{
+ const char *chassisid;
+ size_t len;
+
+ if (hdl->libzfs_fru_hash == NULL)
+ libzfs_fru_refresh(hdl);
+
+ if (hdl->libzfs_chassis_id[0] == '\0')
+ return (B_FALSE);
+
+ if (strstr(fru, "/chassis=0/") == NULL)
+ return (B_FALSE);
+
+ if ((chassisid = strstr(fru, ":chassis-id=")) == NULL)
+ return (B_FALSE);
+
+ chassisid += 12;
+ len = strlen(hdl->libzfs_chassis_id);
+ if (strncmp(chassisid, hdl->libzfs_chassis_id, len) == 0 &&
+ (chassisid[len] == '/' || chassisid[len] == ':'))
+ return (B_FALSE);
+
+ return (B_TRUE);
+}
+
+/*
+ * Clear memory associated with the FRU hash.
+ */
+void
+libzfs_fru_clear(libzfs_handle_t *hdl, boolean_t final)
+{
+ libzfs_fru_t *frup;
+
+ while ((frup = hdl->libzfs_fru_list) != NULL) {
+ hdl->libzfs_fru_list = frup->zf_next;
+ free(frup->zf_device);
+ free(frup->zf_fru);
+ free(frup);
+ }
+
+ hdl->libzfs_fru_list = NULL;
+
+ if (hdl->libzfs_topo_hdl != NULL) {
+ _topo_snap_release(hdl->libzfs_topo_hdl);
+ _topo_close(hdl->libzfs_topo_hdl);
+ hdl->libzfs_topo_hdl = NULL;
+ }
+
+ if (final) {
+ free(hdl->libzfs_fru_hash);
+ } else if (hdl->libzfs_fru_hash != NULL) {
+ bzero(hdl->libzfs_fru_hash,
+ ZFS_FRU_HASH_SIZE * sizeof (void *));
+ }
+}
git://git.camperquake.de / zfs.git / blobdiff