-'\" te
+'\" t
+.\"
+.\" CDDL HEADER START
+.\"
+.\" The contents of this file are subject to the terms of the
+.\" Common Development and Distribution License (the "License").
+.\" You may not use this file except in compliance with the License.
+.\"
+.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+.\" or http://www.opensolaris.org/os/licensing.
+.\" See the License for the specific language governing permissions
+.\" and limitations under the License.
+.\"
+.\" When distributing Covered Code, include this CDDL HEADER in each
+.\" file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+.\" If applicable, add the following below this CDDL HEADER, with the
+.\" fields enclosed by brackets "[]" replaced with your own identifying
+.\" information: Portions Copyright [yyyy] [name of copyright owner]
+.\"
+.\" CDDL HEADER END
+.\"
+.\"
.\" Copyright (c) 2009 Sun Microsystems, Inc. All Rights Reserved.
+.\" Copyright 2011 Joshua M. Clulow <josh@sysmgr.org>
.\" Copyright (c) 2012 by Delphix. All rights reserved.
-.\" Copyright (c) 2012 Nexenta Systems, Inc. All Rights Reserved.
.\" Copyright (c) 2012, Joyent, Inc. All rights reserved.
-.\" Copyright 2011 Joshua M. Clulow <josh@sysmgr.org>
-.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
-.\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with
-.\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH zfs 8 "Aug 16, 2012" "ZFS pool 28, filesystem 5" "System Administration Commands"
+.\" Copyright 2012 Nexenta Systems, Inc. All Rights Reserved.
+.\" Copyright (c) 2013 by Saso Kiselkov. All rights reserved.
+.\"
+.TH zfs 8 "Jan 10, 2013" "ZFS pool 28, filesystem 5" "System Administration Commands"
.SH NAME
zfs \- configures ZFS file systems
.SH SYNOPSIS
.LP
.nf
-\fBzfs\fR \fBuserspace\fR [\fB-niHp\fR] [\fB-o\fR \fIfield\fR[,...]] [\fB-sS\fR \fIfield\fR] ...
- [\fB-t\fR \fItype\fR[,...]] \fIfilesystem\fR|\fIsnapshot\fR
+\fBzfs\fR \fBuserspace\fR [\fB-Hinp\fR] [\fB-o\fR \fIfield\fR[,...]] [\fB-s\fR \fIfield\fR] ...
+ [\fB-S\fR \fIfield\fR] ... [\fB-t\fR \fItype\fR[,...]] \fIfilesystem\fR|\fIsnapshot\fR
.fi
.LP
.nf
-\fBzfs\fR \fBgroupspace\fR [\fB-niHp\fR] [\fB-o\fR \fIfield\fR[,...]] [\fB-sS\fR \fIfield\fR] ...
- [\fB-t\fR \fItype\fR[,...]] \fIfilesystem\fR|\fIsnapshot\fR
+\fBzfs\fR \fBgroupspace\fR [\fB-Hinp\fR] [\fB-o\fR \fIfield\fR[,...]] [\fB-s\fR \fIfield\fR] ...
+ [\fB-S\fR \fIfield\fR] ... [\fB-t\fR \fItype\fR[,...]] \fIfilesystem\fR|\fIsnapshot\fR
.fi
.LP
.LP
.nf
-\fBzfs\fR \fBsend\fR [\fB-DnPpRrv\fR] [\fB-\fR[\fBiI\fR] \fIsnapshot\fR] \fIsnapshot\fR
+\fBzfs\fR \fBsend\fR [\fB-DnPpRv\fR] [\fB-\fR[\fBiI\fR] \fIsnapshot\fR] \fIsnapshot\fR
.fi
.LP
.sp
.LP
If needed, \fBZFS\fR file systems can also be managed with traditional tools (\fBmount\fR, \fBumount\fR, \fB/etc/fstab\fR). If a file system's mount point is set to \fBlegacy\fR, \fBZFS\fR makes no attempt to manage the file system, and the administrator is responsible for mounting and unmounting the file system.
+.SS "Deduplication"
+.sp
+.LP
+Deduplication is the process for removing redundant data at the block-level, reducing the total amount of data stored. If a file system has the \fBdedup\fR property enabled, duplicate data blocks are removed synchronously. The result is that only unique data is stored and common components are shared among files.
.SS "Native Properties"
.sp
.LP
.ad
.sp .6
.RS 4n
-Controls the checksum used to verify data integrity. The default value is \fBon\fR, which automatically selects an appropriate algorithm (currently, \fBfletcher2\fR, but this may change in future releases). The value \fBoff\fR disables integrity checking on user data. Disabling checksums is \fBNOT\fR a recommended practice.
+Controls the checksum used to verify data integrity. The default value is \fBon\fR, which automatically selects an appropriate algorithm (currently, \fBfletcher4\fR, but this may change in future releases). The value \fBoff\fR disables integrity checking on user data. Disabling checksums is \fBNOT\fR a recommended practice.
.sp
Changing this property affects only newly-written data.
.RE
.ne 2
.mk
.na
-\fBcompression\fR=\fBon\fR | \fBoff\fR | \fBlzjb\fR | \fBgzip\fR | \fBgzip-\fR\fIN\fR | \fBzle\fR
+\fBcompression\fR=\fBon\fR | \fBoff\fR | \fBlzjb\fR | \fBgzip\fR | \fBgzip-\fR\fIN\fR | \fBzle\fR | \fBlz4\fR
.ad
.sp .6
.RS 4n
.sp
The \fBzle\fR (zero-length encoding) compression algorithm is a fast and simple algorithm to eliminate runs of zeroes.
.sp
+The \fBlz4\fR compression algorithm is a high-performance replacement
+for the \fBlzjb\fR algorithm. It features significantly faster
+compression and decompression, as well as a moderately higher
+compression ratio than \fBlzjb\fR, but can only be used on pools with
+the \fBlz4_compress\fR feature set to \fIenabled\fR. See
+\fBzpool-features\fR(5) for details on ZFS feature flags and the
+\fBlz4_compress\fR feature.
+.sp
This property can also be referred to by its shortened column name \fBcompress\fR. Changing this property affects only newly-written data.
.RE
.ne 2
.mk
.na
+\fB\fBdedup\fR=\fBon\fR | \fBoff\fR | \fBverify\fR | \fBsha256\fR[,\fBverify\fR]\fR
+.ad
+.sp .6
+.RS 4n
+Controls whether deduplication is in effect for a dataset. The default value is \fBoff\fR. The default checksum used for deduplication is \fBsha256\fR (subject to change). When \fBdedup\fR is enabled, the \fBdedup\fR checksum algorithm overrides the \fBchecksum\fR property. Setting the value to \fBverify\fR is equivalent to specifying \fBsha256,verify\fR.
+.sp
+If the property is set to \fBverify\fR, then, whenever two blocks have the same signature, ZFS will do a byte-for-byte comparison with the existing block to ensure that the contents are identical.
+.RE
+
+.sp
+.ne 2
+.mk
+.na
\fB\fBdevices\fR=\fBon\fR | \fBoff\fR\fR
.ad
.sp .6
.ne 2
.mk
.na
+\fB\fBmlslabel\fR=\fIlabel\fR | \fBnone\fR\fR
+.ad
+.sp .6
+.RS 4n
+The \fBmlslabel\fR property is a sensitivity label that determines if a dataset can be mounted in a zone on a system with Trusted Extensions enabled. If the labeled dataset matches the labeled zone, the dataset can be mounted and accessed from the labeled zone.
+.sp
+When the \fBmlslabel\fR property is not set, the default value is \fBnone\fR. Setting the \fBmlslabel\fR property to \fBnone\fR is equivalent to removing the property.
+.sp
+The \fBmlslabel\fR property can be modified only when Trusted Extensions is enabled and only with appropriate privilege. Rights to modify it cannot be delegated. When changing a label to a higher label or setting the initial dataset label, the \fB{PRIV_FILE_UPGRADE_SL}\fR privilege is required. When changing a label to a lower label or the default (\fBnone\fR), the \fB{PRIV_FILE_DOWNGRADE_SL}\fR privilege is required. Changing the dataset to labels other than the default can be done only when the dataset is not mounted. When a dataset with the default label is mounted into a labeled-zone, the mount operation automatically sets the \fBmlslabel\fR property to the label of that zone.
+.sp
+When Trusted Extensions is \fBnot\fR enabled, only datasets with the default label (\fBnone\fR) can be mounted.
+.sp
+Zones are a Solaris feature and are not relevant on Linux.
+.RE
+
+.sp
+.ne 2
+.mk
+.na
\fB\fBmountpoint\fR=\fIpath\fR | \fBnone\fR | \fBlegacy\fR\fR
.ad
.sp .6
.ad
.sp .6
.RS 4n
-Limits the amount of space consumed by the specified user. User space consumption is identified by the \fBuserspace@\fR\fIuser\fR property.
+Limits the amount of space consumed by the specified user. Similar to the \fBrefquota\fR property, the \fBuserquota\fR space calculation does not include space that is used by descendent datasets, such as snapshots and clones. User space consumption is identified by the \fBuserspace@\fR\fIuser\fR property.
.sp
Enforcement of user quotas may be delayed by several seconds. This delay means that a user might exceed their quota before the system notices that they are over quota and begins to refuse additional writes with the \fBEDQUOT\fR error message . See the \fBzfs userspace\fR subcommand for more information.
.sp
.ne 2
.mk
.na
-\fB\fBsharesmb\fR=\fBon\fR | \fBoff\fR | \fIopts\fR\fR
+\fB\fBsharesmb\fR=\fBon\fR | \fBoff\fR
.ad
.sp .6
.RS 4n
-Controls whether the file system is shared by using the Solaris \fBCIFS\fR service, and what options are to be used. A file system with the \fBsharesmb\fR property set to \fBoff\fR is managed through traditional tools such as \fBsharemgr\fR(1M). Otherwise, the file system is automatically shared and unshared with the \fBzfs share\fR and \fBzfs unshare\fR commands. If the property is set to \fBon\fR, the \fBsharemgr\fR(1M) command is invoked with no options. Otherwise, the \fBsharemgr\fR(1M) command is invoked with options equivalent to the contents of this property.
+Controls whether the file system is shared by using \fBSamba USERSHARES\fR, and what options are to be used. Otherwise, the file system is automatically shared and unshared with the \fBzfs share\fR and \fBzfs unshare\fR commands. If the property is set to \fBon\fR, the \fBnet\fR(8) command is invoked to create a \fBUSERSHARE\fR.
+.sp
+Because \fBSMB\fR shares requires a resource name, a unique resource name is constructed from the dataset name. The constructed name is a copy of the dataset name except that the characters in the dataset name, which would be illegal in the resource name, are replaced with underscore (\fB_\fR) characters. The ZFS On Linux driver does not (yet) support additional options which might be availible in the Solaris version.
+.sp
+If the \fBsharesmb\fR property is set to \fBoff\fR, the file systems are unshared.
+.sp
+In Linux, the share is created with the ACL (Access Control List) "Everyone:F" ("F" stands for "full permissions", ie. read and write permissions) and no guest access (which means samba must be able to authenticate a real user, system passwd/shadow, ldap or smbpasswd based) by default. This means that any additional access control (dissalow specific user specific access etc) must be done on the underlaying filesystem.
+.sp
+.in +2
+Example to mount a SMB filesystem shared through ZFS (share/tmp):
+.mk
+Note that a user and his/her password \fBmust\fR be given!
+.sp
+.in +2
+smbmount //127.0.0.1/share_tmp /mnt/tmp -o user=workgroup/turbo,password=obrut,uid=1000
+.in -2
+.in -2
.sp
-Because \fBSMB\fR shares requires a resource name, a unique resource name is constructed from the dataset name. The constructed name is a copy of the dataset name except that the characters in the dataset name, which would be illegal in the resource name, are replaced with underscore (\fB_\fR) characters. A pseudo property "name" is also supported that allows you to replace the data set name with a specified name. The specified name is then used to replace the prefix dataset in the case of inheritance. For example, if the dataset \fBdata/home/john\fR is set to \fBname=john\fR, then \fBdata/home/john\fR has a resource name of \fBjohn\fR. If a child dataset of \fBdata/home/john/backups\fR, it has a resource name of \fBjohn_backups\fR.
+.ne 2
+.mk
+.na
+\fBMinimal /etc/samba/smb.conf configuration\fR
+.sp
+.in +2
+* Samba will need to listen to 'localhost' (127.0.0.1) for the zfs utilities to communitate with samba. This is the default behavior for most Linux distributions.
.sp
-When SMB shares are created, the SMB share name appears as an entry in the \fB\&.zfs/shares\fR directory. You can use the \fBls\fR or \fBchmod\fR command to display the share-level ACLs on the entries in this directory.
+* Samba must be able to authenticate a user. This can be done in a number of ways, depending on if using the system password file, LDAP or the Samba specific smbpasswd file. How to do this is outside the scope of this manual. Please refer to the smb.conf(5) manpage for more information.
.sp
-When the \fBsharesmb\fR property is changed for a dataset, the dataset and any children inheriting the property are re-shared with the new options, only if the property was previously set to \fBoff\fR, or if they were shared before the property was changed. If the new property is set to \fBoff\fR, the file systems are unshared.
+* See the \fBUSERSHARE\fR section of the \fBsmb.conf\fR(5) man page for all configuration options in case you need to modify any options to the share afterwards. Do note that any changes done with the 'net' command will be undone if the share is every unshared (such as at a reboot etc). In the future, ZoL will be able to set specific options directly using sharesmb=<option>.
+.sp
+.in -2
.RE
.sp
.ne 2
.mk
.na
+\fB\fBsnapdev\fR=\fBhidden\fR | \fBvisible\fR\fR
+.ad
+.sp .6
+.RS 4n
+Controls whether the snapshots devices of zvol's are hidden or visible. The default value is \fBhidden\fR.
+.RE
+
+.sp
+.ne 2
+.mk
+.na
\fB\fBsnapdir\fR=\fBhidden\fR | \fBvisible\fR\fR
.ad
.sp .6
.SS "ZFS Volumes as Swap"
.sp
.LP
-Do not swap to a file on a \fBZFS\fR file system. A \fBZFS\fR swap file configuration is not supported.
+\fBZFS\fR volumes may be used as Linux swap devices. After creating the volume
+with the \fBzfs create\fR command set up and enable the swap area using the
+\fBmkswap\fR(8) and \fBswapon\fR(8) commands. Do not swap to a file on a
+\fBZFS\fR file system. A \fBZFS\fR swap file configuration is not supported.
.SH SUBCOMMANDS
.sp
.LP
.ne 2
.mk
.na
-\fB\fBzfs userspace\fR [\fB-niHp\fR] [\fB-o\fR \fIfield\fR[,...]] [\fB-sS\fR \fIfield\fR]... [\fB-t\fR \fItype\fR [,...]] \fIfilesystem\fR | \fIsnapshot\fR\fR
+\fBzfs\fR \fBuserspace\fR [\fB-Hinp\fR] [\fB-o\fR \fIfield\fR[,...]]
+[\fB-s\fR \fIfield\fR] ...
+[\fB-S\fR \fIfield\fR] ...
+[\fB-t\fR \fItype\fR[,...]] \fIfilesystem\fR|\fIsnapshot\fR
.ad
.sp .6
.RS 4n
-Displays space consumed by, and quotas on, each user in the specified filesystem or snapshot. This corresponds to the \fBuserused@\fR\fIuser\fR and \fBuserquota@\fR\fIuser\fR properties.
+Displays space consumed by, and quotas on, each user in the specified
+filesystem or snapshot. This corresponds to the \fBuserused@\fR\fIuser\fR and
+\fBuserquota@\fR\fIuser\fR properties.
.sp
.ne 2
.mk
.ad
.sp .6
.RS 4n
-Use exact (parseable) numeric output.
+Use exact (parsable) numeric output.
.RE
.sp
.ad
.sp .6
.RS 4n
-Display only the specified fields from the following set, \fBtype,name,used,quota\fR.The default is to display all fields.
+Display only the specified fields from the following
+set: \fBtype, name, used, quota\fR. The default is to display all fields.
.RE
.sp
.ad
.sp .6
.RS 4n
-Sort output by this field. The \fIs\fR and \fIS\fR flags may be specified multiple times to sort first by one field, then by another. The default is \fB-s type\fR \fB-s name\fR.
+Sort output by this field. The \fIs\fR and \fIS\fR flags may be specified
+multiple times to sort first by one field, then by another. The default is
+\fB-s type\fR \fB-s name\fR.
.RE
.sp
.ad
.sp .6
.RS 4n
-Print only the specified types from the following set, \fBall,posixuser,smbuser,posixgroup,smbgroup\fR.
-.sp
-The default is \fB-t posixuser,smbuser\fR
-.sp
-The default can be changed to include group types.
+Print only the specified types from the following
+set: \fBall, posixuser, smbuser, posixgroup, smbgroup\fR. The default
+is \fB-t posixuser,smbuser\fR. The default can be changed to include group
+types.
.RE
.sp
.ad
.sp .6
.RS 4n
-Translate SID to POSIX ID. The POSIX ID may be ephemeral if no mapping exists. Normal POSIX interfaces (for example, \fBstat\fR(2), \fBls\fR \fB-l\fR) perform this translation, so the \fB-i\fR option allows the output from \fBzfs userspace\fR to be compared directly with those utilities. However, \fB-i\fR may lead to confusion if some files were created by an SMB user before a SMB-to-POSIX name mapping was established. In such a case, some files are owned by the SMB entity and some by the POSIX entity. However, the \fB-i\fR option will report that the POSIX entity has the total usage and quota for both.
+Translate SID to POSIX ID. The POSIX ID may be ephemeral if no mapping exists.
+Normal POSIX interfaces (for example, \fBstat\fR(2), \fBls\fR \fB-l\fR) perform
+this translation, so the \fB-i\fR option allows the output from \fBzfs
+userspace\fR to be compared directly with those utilities. However, \fB-i\fR
+may lead to confusion if some files were created by an SMB user before a
+SMB-to-POSIX name mapping was established. In such a case, some files will be owned
+by the SMB entity and some by the POSIX entity. However, the \fB-i\fR option
+will report that the POSIX entity has the total usage and quota for both.
.RE
.RE
.ne 2
.mk
.na
-\fB\fBzfs groupspace\fR [\fB-niHp\fR] [\fB-o\fR \fIfield\fR[,...]] [\fB-sS\fR \fIfield\fR]... [\fB-t\fR \fItype\fR [,...]] \fIfilesystem\fR | \fIsnapshot\fR\fR
+\fBzfs\fR \fBgroupspace\fR [\fB-Hinp\fR] [\fB-o\fR \fIfield\fR[,...]]
+[\fB-s\fR \fIfield\fR] ...
+[\fB-S\fR \fIfield\fR] ...
+[\fB-t\fR \fItype\fR[,...]] \fIfilesystem\fR|\fIsnapshot\fR
.ad
.sp .6
.RS 4n
-Displays space consumed by, and quotas on, each group in the specified filesystem or snapshot. This subcommand is identical to \fBzfs userspace\fR, except that the default types to display are \fB-t posixgroup,smbgroup\fR.
-.sp
-.in +2
-.nf
--
-.fi
-.in -2
-.sp
-
+Displays space consumed by, and quotas on, each group in the specified
+filesystem or snapshot. This subcommand is identical to \fBzfs userspace\fR,
+except that the default types to display are \fB-t posixgroup,smbgroup\fR.
.RE
.sp
.ad
.sp .6
.RS 4n
-An optional, comma-separated list of mount options to use temporarily for the duration of the mount. See the "Temporary Mount Point Properties" section for details.
+An optional, comma-separated list of mount options to use temporarily for the
+duration of the mount. See the "Temporary Mount Point Properties" section for
+details.
.RE
.sp
.ad
.sp .6
.RS 4n
-Mount all available \fBZFS\fR file systems. Invoked automatically as part of the boot process.
+Mount all available \fBZFS\fR file systems. Invoked automatically as part of
+the boot process.
.RE
.sp
.ne 2
.mk
.na
-\fBzfs send\fR [\fB-DnPpRrv\fR] [\fB-\fR[\fBiI\fR] \fIsnapshot\fR] \fIsnapshot\fR
+\fBzfs send\fR [\fB-DnPpRv\fR] [\fB-\fR[\fBiI\fR] \fIsnapshot\fR] \fIsnapshot\fR
.ad
.sp .6
.RS 4n
.ne 2
.mk
.na
-\fB\fB-v\fR\fR
+\fB\fB-R\fR\fR
.ad
.sp .6
.RS 4n
-Print verbose information about the stream package generated. This information
-includes a per-second report of how much data has been sent.
+Generate a replication stream package, which will replicate the specified filesystem, and all descendent file systems, up to the named snapshot. When received, all properties, snapshots, descendent file systems, and clones are preserved.
+.sp
+If the \fB-i\fR or \fB-I\fR flags are used in conjunction with the \fB-R\fR flag, an incremental replication stream is generated. The current values of properties, and current snapshot and file system names are set when the stream is received. If the \fB-F\fR flag is specified when this stream is received, snapshots and file systems that do not exist on the sending side are destroyed.
.RE
.sp
.ne 2
.mk
.na
-\fB\fB-R\fR\fR
+\fB\fB-D\fR\fR
.ad
.sp .6
.RS 4n
-Generate a replication stream package, which will replicate the specified filesystem, and all descendent file systems, up to the named snapshot. When received, all properties, snapshots, descendent file systems, and clones are preserved.
-.sp
-If the \fB-i\fR or \fB-I\fR flags are used in conjunction with the \fB-R\fR flag, an incremental replication stream is generated. The current values of properties, and current snapshot and file system names are set when the stream is received. If the \fB-F\fR flag is specified when this stream is received, snapshots and file systems that do not exist on the sending side are destroyed.
+Generate a deduplicated stream. Blocks which would have been sent multiple times in the send stream will only be sent once. The receiving system must also support this feature to recieve a deduplicated stream. This flag can be used regardless of the dataset's dedup property, but performance will be much better if the filesystem uses a dedup-capable checksum (eg. sha256).
.RE
.sp
.ne 2
.mk
.na
-\fB\fB-D\fR\fR
+\fB\fB-p\fR\fR
.ad
.sp .6
.RS 4n
-This option will cause dedup processing to be performed on the data being written to a send stream. Dedup processing is optional because it isn't always appropriate (some kinds of data have very little duplication) and it has significant costs: the checksumming required to detect duplicate blocks is CPU-intensive and the data that must be maintained while the stream is being processed can occupy a very large amount of memory.
+Include the dataset's properties in the stream. This flag is implicit when -R is specified. The receiving system must also support this feature.
+.RE
+
.sp
-Duplicate blocks are detected by calculating a cryptographically strong checksum on each data block. Blocks that have the same checksum are presumed to be identical. The checksum type used at this time is SHA256. However, the stream format contains a field which identifies the checksum type, permitting other checksums to be used in the future.
+.ne 2
+.na
+\fB\fB-n\fR\fR
+.ad
+.sp .6
+.RS 4n
+Do a dry-run ("No-op") send. Do not generate any actual send data. This is
+useful in conjunction with the \fB-v\fR or \fB-P\fR flags to determine what
+data will be sent.
+.RE
+
+.sp
+.ne 2
+.na
+\fB\fB-P\fR\fR
+.ad
+.sp .6
+.RS 4n
+Print machine-parsable verbose information about the stream package generated.
.RE
.sp
.ne 2
.mk
.na
-\fB\fB-p\fR\fR
+\fB\fB-v\fR\fR
.ad
.sp .6
.RS 4n
-Include properties in the send stream without the -R option.
+Print verbose information about the stream package generated. This information
+includes a per-second report of how much data has been sent.
.RE
The format of the stream is committed. You will be able to receive your streams on future versions of \fBZFS\fR.
.sp
.ne 2
-.mk
-.na
-\fB\fB-D\fR\fR
-.ad
-.sp .6
-.RS 4n
-Generate a deduplicated stream. Blocks which would have been sent multiple
-times in the send stream will only be sent once. The receiving system must
-also support this feature to recieve a deduplicated stream. This flag can
-be used regardless of the dataset's \fBdedup\fR property, but performance
-will be much better if the filesystem uses a dedup-capable checksum (eg.
-\fBsha256\fR).
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fB-r\fR\fR
-.ad
-.sp .6
-.RS 4n
-Recursively send all descendant snapshots. This is similar to the \fB-R\fR
-flag, but information about deleted and renamed datasets is not included, and
-property information is only included if the \fB-p\fR flag is specified.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fB-p\fR\fR
-.ad
-.sp .6
-.RS 4n
-Include the dataset's properties in the stream. This flag is implicit when
-\fB-R\fR is specified. The receiving system must also support this feature.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fB-n\fR\fR
-.ad
-.sp .6
-.RS 4n
-Do a dry-run ("No-op") send. Do not generate any actual send data. This is
-useful in conjunction with the \fB-v\fR or \fB-P\fR flags to determine what
-data will be sent.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fB-P\fR\fR
-.ad
-.sp .6
-.RS 4n
-Print machine-parsable verbose information about the stream package generated.
-.RE
-
-.sp
-.ne 2
.na
\fB\fB-v\fR\fR
.ad
checksum property
compression property
copies property
+dedup property
devices property
exec property
+logbias property
+mlslabel property
mountpoint property
nbmand property
normalization property
pool/home/bob usedbydataset 21K -
pool/home/bob usedbychildren 0 -
pool/home/bob usedbyrefreservation 0 -
+pool/home/bob logbias latency default
+pool/home/bob dedup off default
+pool/home/bob mlslabel none default
.fi
.in -2
.sp
# \fBzfs destroy -r pool/users@7daysago\fR
# \fBzfs rename -r pool/users@6daysago @7daysago\fR
# \fBzfs rename -r pool/users@5daysago @6daysago\fR
-# \fBzfs rename -r pool/users@yesterday @5daysago\fR
-# \fBzfs rename -r pool/users@yesterday @4daysago\fR
-# \fBzfs rename -r pool/users@yesterday @3daysago\fR
+# \fBzfs rename -r pool/users@4daysago @5daysago\fR
+# \fBzfs rename -r pool/users@3daysago @4daysago\fR
+# \fBzfs rename -r pool/users@2daysago @3daysago\fR
# \fBzfs rename -r pool/users@yesterday @2daysago\fR
# \fBzfs rename -r pool/users@today @yesterday\fR
# \fBzfs snapshot -r pool/users@today\fR
git://git.camperquake.de / zfs.git / blobdiff