usage() {
cat << EOF
USAGE:
-$0 [hvc]
+$0 [hvcts]
DESCRIPTION:
ZFS/ZPOOL configuration tests
-h Show this message
-v Verbose
-c Cleanup lo+file devices at start
+ -t <#> Run listed tests
+ -s <#> Skip listed tests
EOF
}
-while getopts 'hvc?' OPTION; do
+while getopts 'hvct:s:?' OPTION; do
case $OPTION in
h)
usage
c)
CLEANUP=1
;;
+ t)
+ TESTS_RUN=($OPTARG)
+ ;;
+ s)
+ TESTS_SKIP=($OPTARG)
+ ;;
?)
usage
exit
die "Must run as root"
fi
+# Initialize the test suite
+init
+
# Perform pre-cleanup is requested
if [ ${CLEANUP} ]; then
+ ${ZFS_SH} -u
+ cleanup_md_devices
cleanup_loop_devices
rm -f /tmp/zpool.cache.*
fi
-zconfig_partition() {
- local DEVICE=$1
- local START=$2
- local END=$3
- local TMP_FILE=`mktemp`
-
- /sbin/sfdisk -q ${DEVICE} << EOF &>${TMP_FILE} || fail 4
-${START},${END}
-;
-;
-;
-EOF
-
- rm ${TMP_FILE}
-}
+# Check if we need to skip the tests that require scsi_debug and lsscsi.
+SCSI_DEBUG=0
+${INFOMOD} scsi_debug &>/dev/null && SCSI_DEBUG=1
+HAVE_LSSCSI=0
+test -f ${LSSCSI} && HAVE_LSSCSI=1
+if [ ${SCSI_DEBUG} -eq 0 ] || [ ${HAVE_LSSCSI} -eq 0 ]; then
+ echo "Skipping test 10 which requires the scsi_debug " \
+ "module and the ${LSSCSI} utility"
+fi
# Validate persistent zpool.cache configuration.
-zconfig_test1() {
+test_1() {
local POOL_NAME=test1
local TMP_FILE1=`mktemp`
local TMP_FILE2=`mktemp`
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
- echo -n "test 1 - persistent zpool.cache: "
-
# Create a pool save its status for comparison.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
pass
}
-zconfig_test1
+run_test 1 "persistent zpool.cache"
# Validate ZFS disk scanning and import w/out zpool.cache configuration.
-zconfig_test2() {
+test_2() {
local POOL_NAME=test2
local TMP_FILE1=`mktemp`
local TMP_FILE2=`mktemp`
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
- echo -n "test 2 - scan disks for pools to import: "
-
# Create a pool save its status for comparison.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
rm -f ${TMP_CACHE} || fail 5
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 6
${ZPOOL} import | grep ${POOL_NAME} >/dev/null || fail 7
- ${ZPOOL} import ${POOL_NAME} || fail 8
+ ${ZPOOL} import -f ${POOL_NAME} || fail 8
${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 9
cmp ${TMP_FILE1} ${TMP_FILE2} || fail 10
pass
}
-zconfig_test2
+run_test 2 "scan disks for pools to import"
zconfig_zvol_device_stat() {
local EXPECT=$1
- local POOL_NAME=/dev/$2
- local ZVOL_NAME=/dev/$3
- local SNAP_NAME=/dev/$4
- local CLONE_NAME=/dev/$5
+ local POOL_NAME=/dev/zvol/$2
+ local ZVOL_NAME=/dev/zvol/$3
+ local SNAP_NAME=/dev/zvol/$4
+ local CLONE_NAME=/dev/zvol/$5
local COUNT=0
# Briefly delay for udev
- sleep 1
+ udev_trigger
# Pool exists
stat ${POOL_NAME} &>/dev/null && let COUNT=$COUNT+1
# Volume and partitions
stat ${ZVOL_NAME} &>/dev/null && let COUNT=$COUNT+1
- stat ${ZVOL_NAME}1 &>/dev/null && let COUNT=$COUNT+1
- stat ${ZVOL_NAME}2 &>/dev/null && let COUNT=$COUNT+1
+ stat ${ZVOL_NAME}-part1 &>/dev/null && let COUNT=$COUNT+1
+ stat ${ZVOL_NAME}-part2 &>/dev/null && let COUNT=$COUNT+1
# Snapshot with partitions
stat ${SNAP_NAME} &>/dev/null && let COUNT=$COUNT+1
- stat ${SNAP_NAME}1 &>/dev/null && let COUNT=$COUNT+1
- stat ${SNAP_NAME}2 &>/dev/null && let COUNT=$COUNT+1
+ stat ${SNAP_NAME}-part1 &>/dev/null && let COUNT=$COUNT+1
+ stat ${SNAP_NAME}-part2 &>/dev/null && let COUNT=$COUNT+1
# Clone with partitions
stat ${CLONE_NAME} &>/dev/null && let COUNT=$COUNT+1
- stat ${CLONE_NAME}1 &>/dev/null && let COUNT=$COUNT+1
- stat ${CLONE_NAME}2 &>/dev/null && let COUNT=$COUNT+1
+ stat ${CLONE_NAME}-part1 &>/dev/null && let COUNT=$COUNT+1
+ stat ${CLONE_NAME}-part2 &>/dev/null && let COUNT=$COUNT+1
if [ $EXPECT -ne $COUNT ]; then
return 1
# zpool import/export device check
# (1 volume, 2 partitions, 1 snapshot, 1 clone)
-zconfig_test3() {
+test_3() {
local POOL_NAME=tank
local ZVOL_NAME=volume
local SNAP_NAME=snap
local FULL_CLONE_NAME=${POOL_NAME}/${CLONE_NAME}
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
- echo -n "test 3 - zpool import/export device: "
-
# Create a pool, volume, partition, snapshot, and clone.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
${ZFS} create -V 100M ${FULL_ZVOL_NAME} || fail 3
- zconfig_partition /dev/${FULL_ZVOL_NAME} 0 64 || fail 4
+ ${ZFS} set snapdev=visible ${FULL_ZVOL_NAME} || fail 3
+ label /dev/zvol/${FULL_ZVOL_NAME} msdos || fail 4
+ partition /dev/zvol/${FULL_ZVOL_NAME} primary 1% 50% || fail 4
+ partition /dev/zvol/${FULL_ZVOL_NAME} primary 51% -1 || fail 4
${ZFS} snapshot ${FULL_SNAP_NAME} || fail 5
${ZFS} clone ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 6
pass
}
-zconfig_test3
+run_test 3 "zpool import/export device"
# zpool insmod/rmmod device check (1 volume, 1 snapshot, 1 clone)
-zconfig_test4() {
+test_4() {
POOL_NAME=tank
ZVOL_NAME=volume
SNAP_NAME=snap
FULL_CLONE_NAME=${POOL_NAME}/${CLONE_NAME}
TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
- echo -n "test 4 - zpool insmod/rmmod device: "
-
# Create a pool, volume, snapshot, and clone
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
${ZFS} create -V 100M ${FULL_ZVOL_NAME} || fail 3
- zconfig_partition /dev/${FULL_ZVOL_NAME} 0 64 || fail 4
+ ${ZFS} set snapdev=visible ${FULL_ZVOL_NAME} || fail 3
+ label /dev/zvol/${FULL_ZVOL_NAME} msdos || fail 4
+ partition /dev/zvol/${FULL_ZVOL_NAME} primary 1% 50% || fail 4
+ partition /dev/zvol/${FULL_ZVOL_NAME} primary 51% -1 || fail 4
${ZFS} snapshot ${FULL_SNAP_NAME} || fail 5
${ZFS} clone ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 6
zconfig_zvol_device_stat 0 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 9
- # Load the modules, wait 1 second for udev
+ # Load the modules, list the pools to ensure they are opened
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 10
+ ${ZPOOL} list &>/dev/null
# Verify the devices were created
zconfig_zvol_device_stat 10 ${POOL_NAME} ${FULL_ZVOL_NAME} \
pass
}
-zconfig_test4
+run_test 4 "zpool insmod/rmmod device"
# ZVOL volume sanity check
-zconfig_test5() {
+test_5() {
local POOL_NAME=tank
local ZVOL_NAME=fish
local FULL_NAME=${POOL_NAME}/${ZVOL_NAME}
- local SRC_DIR=/bin/
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
- echo -n "test 5 - zvol+ext3 volume: "
-
# Create a pool and volume.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
- ${ZFS} create -V 400M ${FULL_NAME} || fail 3
-
- # Partition the volume, for a 400M volume there will be
- # 812 cylinders, 16 heads, and 63 sectors per track.
- zconfig_partition /dev/${FULL_NAME} 0 812
-
- # Format the partition with ext3.
- /sbin/mkfs.ext3 -q /dev/${FULL_NAME}1 || fail 5
-
- # Mount the ext3 filesystem and copy some data to it.
- mkdir -p /tmp/${ZVOL_NAME}1 || fail 6
- mount /dev/${FULL_NAME}1 /tmp/${ZVOL_NAME}1 || fail 7
- cp -RL ${SRC_DIR} /tmp/${ZVOL_NAME}1 || fail 8
+ ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raid0 || fail 2
+ ${ZFS} create -V 800M ${FULL_NAME} || fail 3
+ label /dev/zvol/${FULL_NAME} msdos || fail 4
+ partition /dev/zvol/${FULL_NAME} primary 1 -1 || fail 4
+ format /dev/zvol/${FULL_NAME}-part1 ext2 || fail 5
+
+ # Mount the ext2 filesystem and copy some data to it.
+ mkdir -p /tmp/${ZVOL_NAME}-part1 || fail 6
+ mount /dev/zvol/${FULL_NAME}-part1 /tmp/${ZVOL_NAME}-part1 || fail 7
+ cp -RL ${SRC_DIR} /tmp/${ZVOL_NAME}-part1 || fail 8
sync
# Verify the copied files match the original files.
- diff -ur ${SRC_DIR} /tmp/${ZVOL_NAME}1${SRC_DIR} &>/dev/null || fail 9
+ diff -ur ${SRC_DIR} /tmp/${ZVOL_NAME}-part1/${SRC_DIR##*/} \
+ &>/dev/null || fail 9
# Remove the files, umount, destroy the volume and pool.
- rm -Rf /tmp/${ZVOL_NAME}1${SRC_DIR}* || fail 10
- umount /tmp/${ZVOL_NAME}1 || fail 11
- rmdir /tmp/${ZVOL_NAME}1 || fail 12
+ rm -Rf /tmp/${ZVOL_NAME}-part1/${SRC_DIR##*/} || fail 10
+ umount /tmp/${ZVOL_NAME}-part1 || fail 11
+ rmdir /tmp/${ZVOL_NAME}-part1 || fail 12
${ZFS} destroy ${FULL_NAME} || fail 13
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 14
pass
}
-zconfig_test5
+run_test 5 "zvol+ext2 volume"
# ZVOL snapshot sanity check
-zconfig_test6() {
+test_6() {
local POOL_NAME=tank
local ZVOL_NAME=fish
local SNAP_NAME=pristine
local FULL_ZVOL_NAME=${POOL_NAME}/${ZVOL_NAME}
local FULL_SNAP_NAME=${POOL_NAME}/${ZVOL_NAME}@${SNAP_NAME}
- local SRC_DIR=/bin/
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
- echo -n "test 6 - zvol+ext2 snapshot: "
-
# Create a pool and volume.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
- ${ZFS} create -V 400M ${FULL_ZVOL_NAME} || fail 3
-
- # Partition the volume, for a 400M volume there will be
- # 812 cylinders, 16 heads, and 63 sectors per track.
- zconfig_partition /dev/${FULL_ZVOL_NAME} 0 812
-
- # Format the partition with ext2 (no journal).
- /sbin/mkfs.ext2 -q /dev/${FULL_ZVOL_NAME}1 || fail 5
-
- # Mount the ext3 filesystem and copy some data to it.
- mkdir -p /tmp/${ZVOL_NAME}1 || fail 6
- mount /dev/${FULL_ZVOL_NAME}1 /tmp/${ZVOL_NAME}1 || fail 7
+ ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raid0 || fail 2
+ ${ZFS} create -V 800M ${FULL_ZVOL_NAME} || fail 3
+ ${ZFS} set snapdev=visible ${FULL_ZVOL_NAME} || fail 3
+ label /dev/zvol/${FULL_ZVOL_NAME} msdos || fail 4
+ partition /dev/zvol/${FULL_ZVOL_NAME} primary 1 -1 || fail 4
+ format /dev/zvol/${FULL_ZVOL_NAME}-part1 ext2 || fail 5
+
+ # Mount the ext2 filesystem and copy some data to it.
+ mkdir -p /tmp/${ZVOL_NAME}-part1 || fail 6
+ mount /dev/zvol/${FULL_ZVOL_NAME}-part1 /tmp/${ZVOL_NAME}-part1 \
+ || fail 7
# Snapshot the pristine ext2 filesystem and mount it read-only.
- ${ZFS} snapshot ${FULL_SNAP_NAME} && sleep 1 || fail 8
- mkdir -p /tmp/${SNAP_NAME}1 || fail 9
- mount /dev/${FULL_SNAP_NAME}1 /tmp/${SNAP_NAME}1 &>/dev/null || fail 10
+ ${ZFS} snapshot ${FULL_SNAP_NAME} || fail 8
+ wait_udev /dev/zvol/${FULL_SNAP_NAME}-part1 30 || fail 8
+ mkdir -p /tmp/${SNAP_NAME}-part1 || fail 9
+ mount /dev/zvol/${FULL_SNAP_NAME}-part1 /tmp/${SNAP_NAME}-part1 \
+ &>/dev/null || fail 10
# Copy to original volume
- cp -RL ${SRC_DIR} /tmp/${ZVOL_NAME}1 || fail 11
+ cp -RL ${SRC_DIR} /tmp/${ZVOL_NAME}-part1 || fail 11
sync
# Verify the copied files match the original files,
# and the copied files do NOT appear in the snapshot.
- diff -ur ${SRC_DIR} /tmp/${ZVOL_NAME}1${SRC_DIR} &>/dev/null || fail 12
- diff -ur ${SRC_DIR} /tmp/${SNAP_NAME}1${SRC_DIR} &>/dev/null && fail 13
+ diff -ur ${SRC_DIR} /tmp/${ZVOL_NAME}-part1/${SRC_DIR##*/} \
+ &>/dev/null || fail 12
+ diff -ur ${SRC_DIR} /tmp/${SNAP_NAME}-part1/${SRC_DIR##*/} \
+ &>/dev/null && fail 13
# umount, destroy the snapshot, volume, and pool.
- umount /tmp/${SNAP_NAME}1 || fail 14
- rmdir /tmp/${SNAP_NAME}1 || fail 15
+ umount /tmp/${SNAP_NAME}-part1 || fail 14
+ rmdir /tmp/${SNAP_NAME}-part1 || fail 15
${ZFS} destroy ${FULL_SNAP_NAME} || fail 16
- umount /tmp/${ZVOL_NAME}1 || fail 17
- rmdir /tmp/${ZVOL_NAME}1 || fail 18
+ umount /tmp/${ZVOL_NAME}-part1 || fail 17
+ rmdir /tmp/${ZVOL_NAME}-part1 || fail 18
${ZFS} destroy ${FULL_ZVOL_NAME} || fail 19
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 20
pass
}
-zconfig_test6
+run_test 6 "zvol+ext2 snapshot"
# ZVOL clone sanity check
-zconfig_test7() {
+test_7() {
local POOL_NAME=tank
local ZVOL_NAME=fish
local SNAP_NAME=pristine
local FULL_ZVOL_NAME=${POOL_NAME}/${ZVOL_NAME}
local FULL_SNAP_NAME=${POOL_NAME}/${ZVOL_NAME}@${SNAP_NAME}
local FULL_CLONE_NAME=${POOL_NAME}/${CLONE_NAME}
- local SRC_DIR=/bin/
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
- echo -n "test 7 - zvol+ext2 clone: "
-
# Create a pool and volume.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
- ${ZFS} create -V 400M ${FULL_ZVOL_NAME} || fail 3
+ ${ZFS} create -V 300M ${FULL_ZVOL_NAME} || fail 3
+ ${ZFS} set snapdev=visible ${FULL_ZVOL_NAME} || fail 3
+ label /dev/zvol/${FULL_ZVOL_NAME} msdos || fail 4
+ partition /dev/zvol/${FULL_ZVOL_NAME} primary 1 -1 || fail 4
+ format /dev/zvol/${FULL_ZVOL_NAME}-part1 ext2 || fail 5
- # Partition the volume, for a 400M volume there will be
- # 812 cylinders, 16 heads, and 63 sectors per track.
- zconfig_partition /dev/${FULL_ZVOL_NAME} 0 812
-
- # Format the partition with ext2 (no journal).
- /sbin/mkfs.ext2 -q /dev/${FULL_ZVOL_NAME}1 || fail 5
-
- # Mount the ext3 filesystem and copy some data to it.
- mkdir -p /tmp/${ZVOL_NAME}1 || fail 6
- mount /dev/${FULL_ZVOL_NAME}1 /tmp/${ZVOL_NAME}1 || fail 7
+ # Mount the ext2 filesystem and copy some data to it.
+ mkdir -p /tmp/${ZVOL_NAME}-part1 || fail 6
+ mount /dev/zvol/${FULL_ZVOL_NAME}-part1 /tmp/${ZVOL_NAME}-part1 \
+ || fail 7
# Snapshot the pristine ext2 filesystem and mount it read-only.
- ${ZFS} snapshot ${FULL_SNAP_NAME} && sleep 1 || fail 8
- mkdir -p /tmp/${SNAP_NAME}1 || fail 9
- mount /dev/${FULL_SNAP_NAME}1 /tmp/${SNAP_NAME}1 &>/dev/null || fail 10
+ ${ZFS} snapshot ${FULL_SNAP_NAME} || fail 8
+ wait_udev /dev/zvol/${FULL_SNAP_NAME}-part1 30 || fail 8
+ mkdir -p /tmp/${SNAP_NAME}-part1 || fail 9
+ mount /dev/zvol/${FULL_SNAP_NAME}-part1 \
+ /tmp/${SNAP_NAME}-part1 &>/dev/null || fail 10
# Copy to original volume.
- cp -RL ${SRC_DIR} /tmp/${ZVOL_NAME}1 || fail 11
+ cp -RL ${SRC_DIR} /tmp/${ZVOL_NAME}-part1 || fail 11
sync
# Verify the copied files match the original files,
# and the copied files do NOT appear in the snapshot.
- diff -ur ${SRC_DIR} /tmp/${ZVOL_NAME}1${SRC_DIR} &>/dev/null || fail 12
- diff -ur ${SRC_DIR} /tmp/${SNAP_NAME}1${SRC_DIR} &>/dev/null && fail 13
+ diff -ur ${SRC_DIR} /tmp/${ZVOL_NAME}-part1/${SRC_DIR##*/} \
+ &>/dev/null || fail 12
+ diff -ur ${SRC_DIR} /tmp/${SNAP_NAME}-part1/${SRC_DIR##*/} \
+ &>/dev/null && fail 13
# Clone from the original pristine snapshot
- ${ZFS} clone ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} && sleep 1 || fail 14
- mkdir -p /tmp/${CLONE_NAME}1 || fail 15
- mount /dev/${FULL_CLONE_NAME}1 /tmp/${CLONE_NAME}1 || fail 16
+ ${ZFS} clone ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 14
+ wait_udev /dev/zvol/${FULL_CLONE_NAME}-part1 30 || fail 14
+ mkdir -p /tmp/${CLONE_NAME}-part1 || fail 15
+ mount /dev/zvol/${FULL_CLONE_NAME}-part1 \
+ /tmp/${CLONE_NAME}-part1 || fail 16
# Verify the clone matches the pristine snapshot,
# and the files copied to the original volume are NOT there.
- diff -ur /tmp/${SNAP_NAME}1 /tmp/${CLONE_NAME}1 &>/dev/null || fail 17
- diff -ur /tmp/${ZVOL_NAME}1 /tmp/${CLONE_NAME}1 &>/dev/null && fail 18
+ diff -ur /tmp/${SNAP_NAME}-part1 /tmp/${CLONE_NAME}-part1 \
+ &>/dev/null || fail 17
+ diff -ur /tmp/${ZVOL_NAME}-part1 /tmp/${CLONE_NAME}-part1 \
+ &>/dev/null && fail 18
# Copy to cloned volume.
- cp -RL ${SRC_DIR} /tmp/${CLONE_NAME}1 || fail 19
+ cp -RL ${SRC_DIR} /tmp/${CLONE_NAME}-part1 || fail 19
sync
# Verify the clone matches the modified original volume.
- diff -ur /tmp/${ZVOL_NAME}1 /tmp/${CLONE_NAME}1 &>/dev/null || fail 20
+ diff -ur /tmp/${ZVOL_NAME}-part1 /tmp/${CLONE_NAME}-part1 \
+ &>/dev/null || fail 20
# umount, destroy the snapshot, volume, and pool.
- umount /tmp/${CLONE_NAME}1 || fail 21
- rmdir /tmp/${CLONE_NAME}1 || fail 22
+ umount /tmp/${CLONE_NAME}-part1 || fail 21
+ rmdir /tmp/${CLONE_NAME}-part1 || fail 22
${ZFS} destroy ${FULL_CLONE_NAME} || fail 23
- umount /tmp/${SNAP_NAME}1 || fail 24
- rmdir /tmp/${SNAP_NAME}1 || fail 25
+ umount /tmp/${SNAP_NAME}-part1 || fail 24
+ rmdir /tmp/${SNAP_NAME}-part1 || fail 25
${ZFS} destroy ${FULL_SNAP_NAME} || fail 26
- umount /tmp/${ZVOL_NAME}1 || fail 27
- rmdir /tmp/${ZVOL_NAME}1 || fail 28
+ umount /tmp/${ZVOL_NAME}-part1 || fail 27
+ rmdir /tmp/${ZVOL_NAME}-part1 || fail 28
${ZFS} destroy ${FULL_ZVOL_NAME} || fail 29
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 30
pass
}
-zconfig_test7
+run_test 7 "zvol+ext2 clone"
# Send/Receive sanity check
test_8() {
local FULL_ZVOL_NAME2=${POOL_NAME2}/${ZVOL_NAME}
local FULL_SNAP_NAME1=${POOL_NAME1}/${ZVOL_NAME}@${SNAP_NAME}
local FULL_SNAP_NAME2=${POOL_NAME2}/${ZVOL_NAME}@${SNAP_NAME}
- local SRC_DIR=/bin/
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create two pools and a volume
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME1} -c lo-raidz2 || fail 2
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME2} -c lo-raidz2 || fail 3
- ${ZFS} create -V 400M ${FULL_ZVOL_NAME1} || fail 4
-
- # Partition the volume, for a 400M volume there will be
- # 812 cylinders, 16 heads, and 63 sectors per track.
- zconfig_partition /dev/${FULL_ZVOL_NAME1} 0 812
-
- # Format the partition with ext2.
- /sbin/mkfs.ext2 -q /dev/${FULL_ZVOL_NAME1}1 || fail 5
-
- # Mount the ext3 filesystem and copy some data to it.
- mkdir -p /tmp/${FULL_ZVOL_NAME1}1 || fail 6
- mount /dev/${FULL_ZVOL_NAME1}1 /tmp/${FULL_ZVOL_NAME1}1 || fail 7
- cp -RL ${SRC_DIR} /tmp/${FULL_ZVOL_NAME1}1 || fail 8
+ ${ZPOOL_CREATE_SH} -p ${POOL_NAME2} -c lo-raidz2 || fail 2
+ ${ZFS} create -V 300M ${FULL_ZVOL_NAME1} || fail 3
+ ${ZFS} set snapdev=visible ${FULL_ZVOL_NAME1} || fail 3
+ label /dev/zvol/${FULL_ZVOL_NAME1} msdos || fail 4
+ partition /dev/zvol/${FULL_ZVOL_NAME1} primary 1 -1 || fail 4
+ format /dev/zvol/${FULL_ZVOL_NAME1}-part1 ext2 || fail 5
+
+ # Mount the ext2 filesystem and copy some data to it.
+ mkdir -p /tmp/${FULL_ZVOL_NAME1}-part1 || fail 6
+ mount /dev/zvol/${FULL_ZVOL_NAME1}-part1 \
+ /tmp/${FULL_ZVOL_NAME1}-part1 || fail 7
+ cp -RL ${SRC_DIR} /tmp/${FULL_ZVOL_NAME1}-part1 || fail 8
sync || fail 9
- # Snapshot the ext3 filesystem so it may be sent.
- ${ZFS} snapshot ${FULL_SNAP_NAME1} && sleep 1 || fail 11
+ # Snapshot the ext2 filesystem so it may be sent.
+ ${ZFS} snapshot ${FULL_SNAP_NAME1} || fail 11
+ wait_udev /dev/zvol/${FULL_SNAP_NAME1} 30 || fail 11
# Send/receive the snapshot from POOL_NAME1 to POOL_NAME2
(${ZFS} send ${FULL_SNAP_NAME1} | \
- ${ZFS} receive ${FULL_ZVOL_NAME2}) && sleep 1 || fail 12
+ ${ZFS} receive ${FULL_ZVOL_NAME2}) || fail 12
+ wait_udev /dev/zvol/${FULL_ZVOL_NAME2}-part1 30 || fail 12
- # Mount the sent ext3 filesystem.
- mkdir -p /tmp/${FULL_ZVOL_NAME2}1 || fail 13
- mount /dev/${FULL_ZVOL_NAME2}1 /tmp/${FULL_ZVOL_NAME2}1 || fail 14
+ # Mount the sent ext2 filesystem.
+ mkdir -p /tmp/${FULL_ZVOL_NAME2}-part1 || fail 13
+ mount /dev/zvol/${FULL_ZVOL_NAME2}-part1 \
+ /tmp/${FULL_ZVOL_NAME2}-part1 || fail 14
# Verify the contents of the volumes match
- diff -ur /tmp/${FULL_ZVOL_NAME1}1 /tmp/${FULL_ZVOL_NAME2}1 \
+ diff -ur /tmp/${FULL_ZVOL_NAME1}-part1 /tmp/${FULL_ZVOL_NAME2}-part1 \
&>/dev/null || fail 15
# Umount, destroy the volume and pool.
- umount /tmp/${FULL_ZVOL_NAME1}1 || fail 16
- umount /tmp/${FULL_ZVOL_NAME2}1 || fail 17
- rmdir /tmp/${FULL_ZVOL_NAME1}1 || fail 18
- rmdir /tmp/${FULL_ZVOL_NAME2}1 || fail 19
+ umount /tmp/${FULL_ZVOL_NAME1}-part1 || fail 16
+ umount /tmp/${FULL_ZVOL_NAME2}-part1 || fail 17
+ rmdir /tmp/${FULL_ZVOL_NAME1}-part1 || fail 18
+ rmdir /tmp/${FULL_ZVOL_NAME2}-part1 || fail 19
rmdir /tmp/${POOL_NAME1} || fail 20
rmdir /tmp/${POOL_NAME2} || fail 21
# Create a pool and volume.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
- ${ZFS} create -V 400M ${FULL_NAME} || fail 3
+ ${ZFS} create -V 300M ${FULL_NAME} || fail 3
# Dump the events, there should be at least 5 lines.
${ZPOOL} events >${TMP_EVENTS} || fail 4
}
run_test 9 "zpool events"
-exit 0
+zconfig_add_vdev() {
+ local POOL_NAME=$1
+ local TYPE=$2
+ local DEVICE=$3
+ local TMP_FILE1=`mktemp`
+ local TMP_FILE2=`mktemp`
+ local TMP_FILE3=`mktemp`
+
+ BASE_DEVICE=`basename ${DEVICE}`
+ ${ZPOOL} status ${POOL_NAME} >${TMP_FILE1}
+ ${ZPOOL} add -f ${POOL_NAME} ${TYPE} ${DEVICE} 2>/dev/null || return 1
+ ${ZPOOL} status ${POOL_NAME} >${TMP_FILE2}
+ diff ${TMP_FILE1} ${TMP_FILE2} > ${TMP_FILE3}
+
+ [ `wc -l ${TMP_FILE3}|${AWK} '{print $1}'` -eq 3 ] || return 1
+
+ PARENT_VDEV=`tail -2 ${TMP_FILE3} | head -1 | ${AWK} '{print $NF}'`
+ case $TYPE in
+ cache)
+ [ "${PARENT_VDEV}" = "${TYPE}" ] || return 1
+ ;;
+ log)
+ [ "${PARENT_VDEV}" = "logs" ] || return 1
+ ;;
+ esac
+
+ if ! tail -1 ${TMP_FILE3} |
+ egrep -q "^>[[:space:]]+${BASE_DEVICE}[[:space:]]+ONLINE" ; then
+ return 1
+ fi
+ rm -f ${TMP_FILE1} ${TMP_FILE2} ${TMP_FILE3}
+
+ return 0
+}
+
+# zpool add and remove sanity check
+test_10() {
+ local POOL_NAME=tank
+ local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
+ local TMP_FILE1=`mktemp`
+ local TMP_FILE2=`mktemp`
+
+ if [ ${SCSI_DEBUG} -eq 0 ] || [ ${HAVE_LSSCSI} -eq 0 ] ; then
+ skip
+ return
+ fi
+
+ test `${LSMOD} | grep -c scsi_debug` -gt 0 && \
+ (${RMMOD} scsi_debug || exit 1)
+
+ /sbin/modprobe scsi_debug dev_size_mb=128 ||
+ die "Error $? creating scsi_debug device"
+ udev_trigger
+
+ SDDEVICE=`${LSSCSI}|${AWK} '/scsi_debug/ { print $6; exit }'`
+ BASE_SDDEVICE=`basename $SDDEVICE`
+
+ # Create a pool
+ ${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
+ ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
+ ${ZPOOL} status ${POOL_NAME} >${TMP_FILE1} || fail 3
+
+ # Add and remove a cache vdev by full path
+ zconfig_add_vdev ${POOL_NAME} cache ${SDDEVICE} || fail 4
+ ${ZPOOL} remove ${POOL_NAME} ${SDDEVICE} || fail 5
+ ${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 6
+ cmp ${TMP_FILE1} ${TMP_FILE2} || fail 7
+ sleep 1
+
+ # Add and remove a cache vdev by shorthand path
+ zconfig_add_vdev ${POOL_NAME} cache ${BASE_SDDEVICE} || fail 8
+ ${ZPOOL} remove ${POOL_NAME} ${BASE_SDDEVICE} || fail 9
+ ${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 10
+ cmp ${TMP_FILE1} ${TMP_FILE2} || fail 11
+ sleep 1
+
+ # Add and remove a log vdev
+ zconfig_add_vdev ${POOL_NAME} log ${BASE_SDDEVICE} || fail 12
+ ${ZPOOL} remove ${POOL_NAME} ${BASE_SDDEVICE} || fail 13
+ ${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 14
+ cmp ${TMP_FILE1} ${TMP_FILE2} || fail 15
+
+ ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 16
+ ${ZFS_SH} -u || fail 17
+ ${RMMOD} scsi_debug || fail 18
+
+ rm -f ${TMP_FILE1} ${TMP_FILE2} ${TMP_CACHE} || fail 19
+
+ pass
+}
+run_test 10 "zpool add/remove vdev"
+
+exit 0
git://git.camperquake.de / zfs.git / blobdiff