Initial zio delay timing
authorBrian Behlendorf <behlendorf1@llnl.gov>
Fri, 1 Oct 2010 23:54:52 +0000 (16:54 -0700)
committerBrian Behlendorf <behlendorf1@llnl.gov>
Tue, 12 Oct 2010 21:55:02 +0000 (14:55 -0700)
While there is no right maximum timeout for a disk IO we can start
laying the ground work to measure how long they do take in practice.
This change simply measures the IO time and if it exceeds 30s an
event is posted for 'zpool events'.

This value was carefully selected because for sd devices it implies
that at least one timeout (SD_TIMEOUT) has occured.  Unfortunately,
even with FAILFAST set we may retry and request and not get an
error.  This behavior is strongly dependant on the device driver
and how it is hooked in to the scsi error handling stack.  However
by setting the limit at 30s we can log the event even if no error
was returned.

Slightly longer term we can start recording these delays perhaps
as a simple power-of-two histrogram.  This histogram can then be
reported as part of the 'zpool status' command when given an command
line option.

None of this code changes the internal behavior of ZFS.  Currently
it is simply for reporting excessively long delays.

include/sys/fm/fs/zfs.h
include/sys/zio.h
module/zfs/vdev_disk.c
module/zfs/zfs_fm.c
module/zfs/zio.c

index d157ea1..4571939 100644 (file)
@@ -35,6 +35,7 @@ extern "C" {
 #define        FM_EREPORT_ZFS_CHECKSUM                 "checksum"
 #define        FM_EREPORT_ZFS_IO                       "io"
 #define        FM_EREPORT_ZFS_DATA                     "data"
+#define        FM_EREPORT_ZFS_DELAY                    "delay"
 #define        FM_EREPORT_ZFS_CONFIG_SYNC              "config.sync"
 #define        FM_EREPORT_ZFS_POOL                     "zpool"
 #define        FM_EREPORT_ZFS_POOL_DESTROY             "zpool.destroy"
@@ -81,6 +82,7 @@ extern "C" {
 #define        FM_EREPORT_PAYLOAD_ZFS_ZIO_OFFSET       "zio_offset"
 #define        FM_EREPORT_PAYLOAD_ZFS_ZIO_SIZE         "zio_size"
 #define        FM_EREPORT_PAYLOAD_ZFS_ZIO_FLAGS        "zio_flags"
+#define        FM_EREPORT_PAYLOAD_ZFS_ZIO_DELAY        "zio_delay"
 #define        FM_EREPORT_PAYLOAD_ZFS_PREV_STATE       "prev_state"
 #define        FM_EREPORT_PAYLOAD_ZFS_CKSUM_EXPECTED   "cksum_expected"
 #define        FM_EREPORT_PAYLOAD_ZFS_CKSUM_ACTUAL     "cksum_actual"
index 97d8ec7..a469181 100644 (file)
@@ -116,6 +116,11 @@ enum zio_compress {
        ZIO_COMPRESS_ON_VALUE == ZIO_COMPRESS_LZJB) ||  \
        (compress) == ZIO_COMPRESS_OFF)
 
+/*
+ * Default Linux timeout for a sd device.
+ */
+#define ZIO_DELAY_MAX                  (30 * MILLISEC)
+
 #define        ZIO_FAILURE_MODE_WAIT           0
 #define        ZIO_FAILURE_MODE_CONTINUE       1
 #define        ZIO_FAILURE_MODE_PANIC          2
@@ -401,6 +406,7 @@ struct zio {
        enum zio_flag   io_orig_flags;
        enum zio_stage  io_orig_stage;
        enum zio_stage  io_orig_pipeline;
+       uint64_t        io_delay;
        int             io_error;
        int             io_child_error[ZIO_CHILD_TYPES];
        uint64_t        io_children[ZIO_CHILD_TYPES][ZIO_WAIT_TYPES];
index 8633925..51062ef 100644 (file)
@@ -95,10 +95,10 @@ static void
 vdev_disk_error(zio_t *zio)
 {
 #ifdef ZFS_DEBUG
-       printk("ZFS: zio error=%d type=%d offset=%llu "
-           "size=%llu flags=%x\n", zio->io_error, zio->io_type,
+       printk("ZFS: zio error=%d type=%d offset=%llu size=%llu "
+           "flags=%x delay=%llu\n", zio->io_error, zio->io_type,
            (u_longlong_t)zio->io_offset, (u_longlong_t)zio->io_size,
-           zio->io_flags);
+           zio->io_flags, (u_longlong_t)zio->io_delay);
 #endif
 }
 
@@ -242,6 +242,8 @@ vdev_disk_dio_put(dio_request_t *dr)
                vdev_disk_dio_free(dr);
 
                if (zio) {
+                       zio->io_delay = jiffies_to_msecs(
+                           jiffies_64 - zio->io_delay);
                        zio->io_error = error;
                        ASSERT3S(zio->io_error, >=, 0);
                        if (zio->io_error)
@@ -403,6 +405,8 @@ retry:
 
        /* Extra reference to protect dio_request during submit_bio */
        vdev_disk_dio_get(dr);
+       if (zio)
+               zio->io_delay = jiffies_64;
 
        /* Submit all bio's associated with this dio */
        for (i = 0; i < dr->dr_bio_count; i++)
@@ -442,6 +446,7 @@ BIO_END_IO_PROTO(vdev_disk_io_flush_completion, bio, size, rc)
 {
        zio_t *zio = bio->bi_private;
 
+       zio->io_delay = jiffies_to_msecs(jiffies_64 - zio->io_delay);
        zio->io_error = -rc;
        if (rc && (rc == -EOPNOTSUPP))
                zio->io_vd->vdev_nowritecache = B_TRUE;
@@ -472,6 +477,7 @@ vdev_disk_io_flush(struct block_device *bdev, zio_t *zio)
        bio->bi_end_io = vdev_disk_io_flush_completion;
        bio->bi_private = zio;
        bio->bi_bdev = bdev;
+       zio->io_delay = jiffies_64;
        submit_bio(WRITE_BARRIER, bio);
 
        return 0;
index dd15c5d..74f2756 100644 (file)
@@ -290,6 +290,8 @@ zfs_ereport_start(nvlist_t **ereport_out, nvlist_t **detector_out,
                    DATA_TYPE_INT32, zio->io_error, NULL);
                fm_payload_set(ereport, FM_EREPORT_PAYLOAD_ZFS_ZIO_FLAGS,
                    DATA_TYPE_INT32, zio->io_flags, NULL);
+               fm_payload_set(ereport, FM_EREPORT_PAYLOAD_ZFS_ZIO_DELAY,
+                   DATA_TYPE_UINT64, zio->io_delay, NULL);
 
                /*
                 * If the 'size' parameter is non-zero, it indicates this is a
index 70d3add..9f34a23 100644 (file)
@@ -75,6 +75,7 @@ kmem_cache_t *zio_link_cache;
 kmem_cache_t *zio_buf_cache[SPA_MAXBLOCKSIZE >> SPA_MINBLOCKSHIFT];
 kmem_cache_t *zio_data_buf_cache[SPA_MAXBLOCKSIZE >> SPA_MINBLOCKSHIFT];
 int zio_bulk_flags = 0;
+int zio_delay_max = ZIO_DELAY_MAX;
 
 #ifdef _KERNEL
 extern vmem_t *zio_alloc_arena;
@@ -2754,6 +2755,17 @@ zio_done(zio_t *zio)
 
        vdev_stat_update(zio, zio->io_size);
 
+       /*
+        * If this I/O is attached to a particular vdev is slow, exeeding
+        * 30 seconds to complete, post an error described the I/O delay.
+        * We ignore these errors if the device is currently unavailable.
+        */
+       if (zio->io_delay >= zio_delay_max) {
+               if (zio->io_vd != NULL && !vdev_is_dead(zio->io_vd))
+                       zfs_ereport_post(FM_EREPORT_ZFS_DELAY, zio->io_spa,
+                                         zio->io_vd, zio, 0, 0);
+       }
+
        if (zio->io_error) {
                /*
                 * If this I/O is attached to a particular vdev,
@@ -2993,4 +3005,7 @@ EXPORT_SYMBOL(zio_type_name);
 
 module_param(zio_bulk_flags, int, 0644);
 MODULE_PARM_DESC(zio_bulk_flags, "Additional flags to pass to bulk buffers");
+
+module_param(zio_delay_max, int, 0644);
+MODULE_PARM_DESC(zio_delay_max, "Max zio delay before posting an event (ms)");
 #endif