From: Etienne Dechamps Date: Tue, 17 Jul 2012 08:36:43 +0000 (+0200) Subject: Make configure builtin-aware. X-Git-Url: https://git.camperquake.de/gitweb.cgi?a=commitdiff_plain;h=319a99a3d440480fe9c37f637cb9cac8e0f20ded;p=zfs.git Make configure builtin-aware. This patch adds a new option to configure: --enable-linux-builtin. When this option is used, the following happens: - Compilation of kernel modules is disabled. - A failure to find UTS_RELEASE is followed by a suggestion to run "make prepare" on the kernel source tree. This patch also adds a new test which tries to compile an empty module as a basic toolchain sanity test. If it fails and the option was specified, the error is followed by a suggestion to run "make scripts" on the kernel source tree. Signed-off-by: Prakash Surya Signed-off-by: Brian Behlendorf Issue #851 --- diff --git a/config/kernel.m4 b/config/kernel.m4 index c65c58c..2fb3fc9 100644 --- a/config/kernel.m4 +++ b/config/kernel.m4 @@ -4,6 +4,7 @@ dnl # AC_DEFUN([ZFS_AC_CONFIG_KERNEL], [ ZFS_AC_KERNEL ZFS_AC_SPL + ZFS_AC_TEST_MODULE ZFS_AC_KERNEL_CONFIG ZFS_AC_KERNEL_BDEV_BLOCK_DEVICE_OPERATIONS ZFS_AC_KERNEL_TYPE_FMODE_T @@ -86,7 +87,7 @@ dnl # AC_DEFUN([ZFS_AC_MODULE_SYMVERS], [ modpost=$LINUX/scripts/Makefile.modpost AC_MSG_CHECKING([kernel file name for module symbols]) - AS_IF([test -f "$modpost"], [ + AS_IF([test "x$enable_linux_builtin" != xyes -a -f "$modpost"], [ AS_IF([grep -q Modules.symvers $modpost], [ LINUX_SYMBOLS=Modules.symvers ], [ @@ -191,7 +192,13 @@ AC_DEFUN([ZFS_AC_KERNEL], [ ]) ], [ AC_MSG_RESULT([Not found]) - AC_MSG_ERROR([*** Cannot find UTS_RELEASE definition.]) + if test "x$enable_linux_builtin" != xyes; then + AC_MSG_ERROR([*** Cannot find UTS_RELEASE definition.]) + else + AC_MSG_ERROR([ + *** Cannot find UTS_RELEASE definition. + *** Please run 'make prepare' inside the kernel source tree.]) + fi ]) AC_MSG_RESULT([$kernsrcver]) @@ -313,6 +320,25 @@ AC_DEFUN([ZFS_AC_SPL], [ ]) dnl # +dnl # Basic toolchain sanity check. +dnl # +AC_DEFUN([ZFS_AC_TEST_MODULE], + [AC_MSG_CHECKING([whether modules can be built]) + ZFS_LINUX_TRY_COMPILE([],[],[ + AC_MSG_RESULT([yes]) + ],[ + AC_MSG_RESULT([no]) + if test "x$enable_linux_builtin" != xyes; then + AC_MSG_ERROR([*** Unable to build an empty module.]) + else + AC_MSG_ERROR([ + *** Unable to build an empty module. + *** Please run 'make scripts' inside the kernel source tree.]) + fi + ]) +]) + +dnl # dnl # Certain kernel build options are not supported. These must be dnl # detected at configure time and cause a build failure. Otherwise dnl # modules may be successfully built that behave incorrectly. diff --git a/config/zfs-build.m4 b/config/zfs-build.m4 index 6bfea51..8e6b13b 100644 --- a/config/zfs-build.m4 +++ b/config/zfs-build.m4 @@ -73,6 +73,11 @@ AC_DEFUN([ZFS_AC_CONFIG], [ AS_HELP_STRING([--with-config=CONFIG], [Config file 'kernel|user|all|srpm']), [ZFS_CONFIG="$withval"]) + AC_ARG_ENABLE([linux-builtin], + [AC_HELP_STRING([--enable-linux-builtin], + [Configure for builtin in-tree kernel modules @<:@default=no@:>@])], + [], + [enable_linux_builtin=no]) AC_MSG_CHECKING([zfs config]) AC_MSG_RESULT([$ZFS_CONFIG]); @@ -93,11 +98,10 @@ AC_DEFUN([ZFS_AC_CONFIG], [ esac AM_CONDITIONAL([CONFIG_USER], - [test "$ZFS_CONFIG" = user] || - [test "$ZFS_CONFIG" = all]) + [test "$ZFS_CONFIG" = user -o "$ZFS_CONFIG" = all]) AM_CONDITIONAL([CONFIG_KERNEL], - [test "$ZFS_CONFIG" = kernel] || - [test "$ZFS_CONFIG" = all]) + [test "$ZFS_CONFIG" = kernel -o "$ZFS_CONFIG" = all] && + [test "x$enable_linux_builtin" != xyes ]) ]) dnl # diff --git a/configure b/configure index 22687f5..f3a9288 100755 --- a/configure +++ b/configure @@ -981,6 +981,7 @@ enable_fast_install with_gnu_ld enable_libtool_lock with_config +enable_linux_builtin with_linux with_linux_obj with_spl @@ -1643,6 +1644,8 @@ Optional Features: --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) + --enable-linux-builtin Configure for builtin in-tree kernel modules + [default=no] --enable-debug Enable generic debug support [default=no] --enable-debug-dmu-tx Enable dmu tx validation [default=no] @@ -4839,13 +4842,13 @@ if test "${lt_cv_nm_interface+set}" = set; then else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:4842: $ac_compile\"" >&5) + (eval echo "\"\$as_me:4845: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 - (eval echo "\"\$as_me:4845: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval echo "\"\$as_me:4848: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 - (eval echo "\"\$as_me:4848: output\"" >&5) + (eval echo "\"\$as_me:4851: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" @@ -6051,7 +6054,7 @@ ia64-*-hpux*) ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 6054 "configure"' > conftest.$ac_ext + echo '#line 6057 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -7904,11 +7907,11 @@ else -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7907: $lt_compile\"" >&5) + (eval echo "\"\$as_me:7910: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:7911: \$? = $ac_status" >&5 + echo "$as_me:7914: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. @@ -8243,11 +8246,11 @@ else -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:8246: $lt_compile\"" >&5) + (eval echo "\"\$as_me:8249: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:8250: \$? = $ac_status" >&5 + echo "$as_me:8253: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. @@ -8348,11 +8351,11 @@ else -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:8351: $lt_compile\"" >&5) + (eval echo "\"\$as_me:8354: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:8355: \$? = $ac_status" >&5 + echo "$as_me:8358: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -8403,11 +8406,11 @@ else -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:8406: $lt_compile\"" >&5) + (eval echo "\"\$as_me:8409: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:8410: \$? = $ac_status" >&5 + echo "$as_me:8413: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -11206,7 +11209,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11209 "configure" +#line 11212 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11302,7 +11305,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11305 "configure" +#line 11308 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11945,6 +11948,13 @@ if test "${with_config+set}" = set; then withval=$with_config; ZFS_CONFIG="$withval" fi + # Check whether --enable-linux-builtin was given. +if test "${enable_linux_builtin+set}" = set; then + enableval=$enable_linux_builtin; +else + enable_linux_builtin=no +fi + { $as_echo "$as_me:$LINENO: checking zfs config" >&5 $as_echo_n "checking zfs config... " >&6; } @@ -12183,9 +12193,19 @@ else { $as_echo "$as_me:$LINENO: result: Not found" >&5 $as_echo "Not found" >&6; } - { { $as_echo "$as_me:$LINENO: error: *** Cannot find UTS_RELEASE definition." >&5 + if test "x$enable_linux_builtin" != xyes; then + { { $as_echo "$as_me:$LINENO: error: *** Cannot find UTS_RELEASE definition." >&5 $as_echo "$as_me: error: *** Cannot find UTS_RELEASE definition." >&2;} { (exit 1); exit 1; }; } + else + { { $as_echo "$as_me:$LINENO: error: + *** Cannot find UTS_RELEASE definition. + *** Please run 'make prepare' inside the kernel source tree." >&5 +$as_echo "$as_me: error: + *** Cannot find UTS_RELEASE definition. + *** Please run 'make prepare' inside the kernel source tree." >&2;} + { (exit 1); exit 1; }; } + fi fi @@ -12205,7 +12225,7 @@ $as_echo "$kernsrcver" >&6; } modpost=$LINUX/scripts/Makefile.modpost { $as_echo "$as_me:$LINENO: checking kernel file name for module symbols" >&5 $as_echo_n "checking kernel file name for module symbols... " >&6; } - if test -f "$modpost"; then + if test "x$enable_linux_builtin" != xyes -a -f "$modpost"; then if grep -q Modules.symvers $modpost; then @@ -12394,6 +12414,74 @@ $as_echo "$SPL_SYMBOLS" >&6; } + { $as_echo "$as_me:$LINENO: checking whether modules can be built" >&5 +$as_echo_n "checking whether modules can be built... " >&6; } + + +cat confdefs.h - <<_ACEOF >conftest.c +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + +int +main (void) +{ + + ; + return 0; +} + +_ACEOF + + + rm -Rf build && mkdir -p build + echo "obj-m := conftest.o" >build/Makefile + if { ac_try='cp conftest.c build && make modules -C $LINUX_OBJ EXTRA_CFLAGS="-Werror-implicit-function-declaration $EXTRA_KCFLAGS" $ARCH_UM M=$PWD/build' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } >/dev/null && { ac_try='test -s build/conftest.o' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + if test "x$enable_linux_builtin" != xyes; then + { { $as_echo "$as_me:$LINENO: error: *** Unable to build an empty module." >&5 +$as_echo "$as_me: error: *** Unable to build an empty module." >&2;} + { (exit 1); exit 1; }; } + else + { { $as_echo "$as_me:$LINENO: error: + *** Unable to build an empty module. + *** Please run 'make scripts' inside the kernel source tree." >&5 +$as_echo "$as_me: error: + *** Unable to build an empty module. + *** Please run 'make scripts' inside the kernel source tree." >&2;} + { (exit 1); exit 1; }; } + fi + + + +fi + + rm -Rf build + + + if test "$ZFS_META_LICENSE" = GPL; then @@ -18902,9 +18990,19 @@ else { $as_echo "$as_me:$LINENO: result: Not found" >&5 $as_echo "Not found" >&6; } - { { $as_echo "$as_me:$LINENO: error: *** Cannot find UTS_RELEASE definition." >&5 + if test "x$enable_linux_builtin" != xyes; then + { { $as_echo "$as_me:$LINENO: error: *** Cannot find UTS_RELEASE definition." >&5 $as_echo "$as_me: error: *** Cannot find UTS_RELEASE definition." >&2;} { (exit 1); exit 1; }; } + else + { { $as_echo "$as_me:$LINENO: error: + *** Cannot find UTS_RELEASE definition. + *** Please run 'make prepare' inside the kernel source tree." >&5 +$as_echo "$as_me: error: + *** Cannot find UTS_RELEASE definition. + *** Please run 'make prepare' inside the kernel source tree." >&2;} + { (exit 1); exit 1; }; } + fi fi @@ -18924,7 +19022,7 @@ $as_echo "$kernsrcver" >&6; } modpost=$LINUX/scripts/Makefile.modpost { $as_echo "$as_me:$LINENO: checking kernel file name for module symbols" >&5 $as_echo_n "checking kernel file name for module symbols... " >&6; } - if test -f "$modpost"; then + if test "x$enable_linux_builtin" != xyes -a -f "$modpost"; then if grep -q Modules.symvers $modpost; then @@ -19113,6 +19211,74 @@ $as_echo "$SPL_SYMBOLS" >&6; } + { $as_echo "$as_me:$LINENO: checking whether modules can be built" >&5 +$as_echo_n "checking whether modules can be built... " >&6; } + + +cat confdefs.h - <<_ACEOF >conftest.c +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + +int +main (void) +{ + + ; + return 0; +} + +_ACEOF + + + rm -Rf build && mkdir -p build + echo "obj-m := conftest.o" >build/Makefile + if { ac_try='cp conftest.c build && make modules -C $LINUX_OBJ EXTRA_CFLAGS="-Werror-implicit-function-declaration $EXTRA_KCFLAGS" $ARCH_UM M=$PWD/build' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } >/dev/null && { ac_try='test -s build/conftest.o' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + if test "x$enable_linux_builtin" != xyes; then + { { $as_echo "$as_me:$LINENO: error: *** Unable to build an empty module." >&5 +$as_echo "$as_me: error: *** Unable to build an empty module." >&2;} + { (exit 1); exit 1; }; } + else + { { $as_echo "$as_me:$LINENO: error: + *** Unable to build an empty module. + *** Please run 'make scripts' inside the kernel source tree." >&5 +$as_echo "$as_me: error: + *** Unable to build an empty module. + *** Please run 'make scripts' inside the kernel source tree." >&2;} + { (exit 1); exit 1; }; } + fi + + + +fi + + rm -Rf build + + + if test "$ZFS_META_LICENSE" = GPL; then @@ -25484,8 +25650,7 @@ $as_echo "$as_me: error: Bad value \"$ZFS_CONFIG\" for --with-config, { (exit 1); exit 1; }; } ;; esac - if test "$ZFS_CONFIG" = user || - test "$ZFS_CONFIG" = all; then + if test "$ZFS_CONFIG" = user -o "$ZFS_CONFIG" = all; then CONFIG_USER_TRUE= CONFIG_USER_FALSE='#' else @@ -25493,8 +25658,8 @@ else CONFIG_USER_FALSE= fi - if test "$ZFS_CONFIG" = kernel || - test "$ZFS_CONFIG" = all; then + if test "$ZFS_CONFIG" = kernel -o "$ZFS_CONFIG" = all && + test "x$enable_linux_builtin" != xyes ; then CONFIG_KERNEL_TRUE= CONFIG_KERNEL_FALSE='#' else