299589193e5ca513a5e1baaa9b6d08d70d8d07f0
[zfs.git] / module / zfs / zpl_file.c
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright (c) 2011, Lawrence Livermore National Security, LLC.
23  */
24
25
26 #include <sys/zfs_vfsops.h>
27 #include <sys/zfs_vnops.h>
28 #include <sys/zfs_znode.h>
29 #include <sys/zpl.h>
30
31
32 static int
33 zpl_open(struct inode *ip, struct file *filp)
34 {
35         cred_t *cr = CRED();
36         int error;
37
38         crhold(cr);
39         error = -zfs_open(ip, filp->f_mode, filp->f_flags, cr);
40         crfree(cr);
41         ASSERT3S(error, <=, 0);
42
43         if (error)
44                 return (error);
45
46         return generic_file_open(ip, filp);
47 }
48
49 static int
50 zpl_release(struct inode *ip, struct file *filp)
51 {
52         cred_t *cr = CRED();
53         int error;
54
55         if (ITOZ(ip)->z_atime_dirty)
56                 mark_inode_dirty(ip);
57
58         crhold(cr);
59         error = -zfs_close(ip, filp->f_flags, cr);
60         crfree(cr);
61         ASSERT3S(error, <=, 0);
62
63         return (error);
64 }
65
66 static int
67 zpl_readdir(struct file *filp, void *dirent, filldir_t filldir)
68 {
69         struct dentry *dentry = filp->f_path.dentry;
70         cred_t *cr = CRED();
71         int error;
72
73         crhold(cr);
74         error = -zfs_readdir(dentry->d_inode, dirent, filldir,
75             &filp->f_pos, cr);
76         crfree(cr);
77         ASSERT3S(error, <=, 0);
78
79         return (error);
80 }
81
82 #if defined(HAVE_FSYNC_WITH_DENTRY)
83 /*
84  * Linux 2.6.x - 2.6.34 API,
85  * Through 2.6.34 the nfsd kernel server would pass a NULL 'file struct *'
86  * to the fops->fsync() hook.  For this reason, we must be careful not to
87  * use filp unconditionally.
88  */
89 static int
90 zpl_fsync(struct file *filp, struct dentry *dentry, int datasync)
91 {
92         cred_t *cr = CRED();
93         int error;
94
95         crhold(cr);
96         error = -zfs_fsync(dentry->d_inode, datasync, cr);
97         crfree(cr);
98         ASSERT3S(error, <=, 0);
99
100         return (error);
101 }
102
103 #elif defined(HAVE_FSYNC_WITHOUT_DENTRY)
104 /*
105  * Linux 2.6.35 - 3.0 API,
106  * As of 2.6.35 the dentry argument to the fops->fsync() hook was deemed
107  * redundant.  The dentry is still accessible via filp->f_path.dentry,
108  * and we are guaranteed that filp will never be NULL.
109  */
110 static int
111 zpl_fsync(struct file *filp, int datasync)
112 {
113         struct inode *inode = filp->f_mapping->host;
114         cred_t *cr = CRED();
115         int error;
116
117         crhold(cr);
118         error = -zfs_fsync(inode, datasync, cr);
119         crfree(cr);
120         ASSERT3S(error, <=, 0);
121
122         return (error);
123 }
124
125 #elif defined(HAVE_FSYNC_RANGE)
126 /*
127  * Linux 3.1 - 3.x API,
128  * As of 3.1 the responsibility to call filemap_write_and_wait_range() has
129  * been pushed down in to the .fsync() vfs hook.  Additionally, the i_mutex
130  * lock is no longer held by the caller, for zfs we don't require the lock
131  * to be held so we don't acquire it.
132  */
133 static int
134 zpl_fsync(struct file *filp, loff_t start, loff_t end, int datasync)
135 {
136         struct inode *inode = filp->f_mapping->host;
137         cred_t *cr = CRED();
138         int error;
139
140         error = filemap_write_and_wait_range(inode->i_mapping, start, end);
141         if (error)
142                 return (error);
143
144         crhold(cr);
145         error = -zfs_fsync(inode, datasync, cr);
146         crfree(cr);
147         ASSERT3S(error, <=, 0);
148
149         return (error);
150 }
151 #else
152 #error "Unsupported fops->fsync() implementation"
153 #endif
154
155 ssize_t
156 zpl_read_common(struct inode *ip, const char *buf, size_t len, loff_t pos,
157      uio_seg_t segment, int flags, cred_t *cr)
158 {
159         int error;
160         struct iovec iov;
161         uio_t uio;
162
163         iov.iov_base = (void *)buf;
164         iov.iov_len = len;
165
166         uio.uio_iov = &iov;
167         uio.uio_resid = len;
168         uio.uio_iovcnt = 1;
169         uio.uio_loffset = pos;
170         uio.uio_limit = MAXOFFSET_T;
171         uio.uio_segflg = segment;
172
173         error = -zfs_read(ip, &uio, flags, cr);
174         if (error < 0)
175                 return (error);
176
177         return (len - uio.uio_resid);
178 }
179
180 static ssize_t
181 zpl_read(struct file *filp, char __user *buf, size_t len, loff_t *ppos)
182 {
183         cred_t *cr = CRED();
184         ssize_t read;
185
186         crhold(cr);
187         read = zpl_read_common(filp->f_mapping->host, buf, len, *ppos,
188             UIO_USERSPACE, filp->f_flags, cr);
189         crfree(cr);
190
191         if (read < 0)
192                 return (read);
193
194         *ppos += read;
195         return (read);
196 }
197
198 ssize_t
199 zpl_write_common(struct inode *ip, const char *buf, size_t len, loff_t pos,
200     uio_seg_t segment, int flags, cred_t *cr)
201 {
202         int error;
203         struct iovec iov;
204         uio_t uio;
205
206         iov.iov_base = (void *)buf;
207         iov.iov_len = len;
208
209         uio.uio_iov = &iov;
210         uio.uio_resid = len,
211         uio.uio_iovcnt = 1;
212         uio.uio_loffset = pos;
213         uio.uio_limit = MAXOFFSET_T;
214         uio.uio_segflg = segment;
215
216         error = -zfs_write(ip, &uio, flags, cr);
217         if (error < 0)
218                 return (error);
219
220         return (len - uio.uio_resid);
221 }
222
223 static ssize_t
224 zpl_write(struct file *filp, const char __user *buf, size_t len, loff_t *ppos)
225 {
226         cred_t *cr = CRED();
227         ssize_t wrote;
228
229         crhold(cr);
230         wrote = zpl_write_common(filp->f_mapping->host, buf, len, *ppos,
231             UIO_USERSPACE, filp->f_flags, cr);
232         crfree(cr);
233
234         if (wrote < 0)
235                 return (wrote);
236
237         *ppos += wrote;
238         return (wrote);
239 }
240
241 static loff_t
242 zpl_llseek(struct file *filp, loff_t offset, int whence)
243 {
244 #if defined(SEEK_HOLE) && defined(SEEK_DATA)
245         if (whence == SEEK_DATA || whence == SEEK_HOLE) {
246                 struct inode *ip = filp->f_mapping->host;
247                 loff_t maxbytes = ip->i_sb->s_maxbytes;
248                 loff_t error;
249
250                 spl_inode_lock(ip);
251                 error = -zfs_holey(ip, whence, &offset);
252                 if (error == 0)
253                         error = lseek_execute(filp, ip, offset, maxbytes);
254                 spl_inode_unlock(ip);
255
256                 return (error);
257         }
258 #endif /* SEEK_HOLE && SEEK_DATA */
259
260         return generic_file_llseek(filp, offset, whence);
261 }
262
263 /*
264  * It's worth taking a moment to describe how mmap is implemented
265  * for zfs because it differs considerably from other Linux filesystems.
266  * However, this issue is handled the same way under OpenSolaris.
267  *
268  * The issue is that by design zfs bypasses the Linux page cache and
269  * leaves all caching up to the ARC.  This has been shown to work
270  * well for the common read(2)/write(2) case.  However, mmap(2)
271  * is problem because it relies on being tightly integrated with the
272  * page cache.  To handle this we cache mmap'ed files twice, once in
273  * the ARC and a second time in the page cache.  The code is careful
274  * to keep both copies synchronized.
275  *
276  * When a file with an mmap'ed region is written to using write(2)
277  * both the data in the ARC and existing pages in the page cache
278  * are updated.  For a read(2) data will be read first from the page
279  * cache then the ARC if needed.  Neither a write(2) or read(2) will
280  * will ever result in new pages being added to the page cache.
281  *
282  * New pages are added to the page cache only via .readpage() which
283  * is called when the vfs needs to read a page off disk to back the
284  * virtual memory region.  These pages may be modified without
285  * notifying the ARC and will be written out periodically via
286  * .writepage().  This will occur due to either a sync or the usual
287  * page aging behavior.  Note because a read(2) of a mmap'ed file
288  * will always check the page cache first even when the ARC is out
289  * of date correct data will still be returned.
290  *
291  * While this implementation ensures correct behavior it does have
292  * have some drawbacks.  The most obvious of which is that it
293  * increases the required memory footprint when access mmap'ed
294  * files.  It also adds additional complexity to the code keeping
295  * both caches synchronized.
296  *
297  * Longer term it may be possible to cleanly resolve this wart by
298  * mapping page cache pages directly on to the ARC buffers.  The
299  * Linux address space operations are flexible enough to allow
300  * selection of which pages back a particular index.  The trick
301  * would be working out the details of which subsystem is in
302  * charge, the ARC, the page cache, or both.  It may also prove
303  * helpful to move the ARC buffers to a scatter-gather lists
304  * rather than a vmalloc'ed region.
305  */
306 static int
307 zpl_mmap(struct file *filp, struct vm_area_struct *vma)
308 {
309         struct inode *ip = filp->f_mapping->host;
310         znode_t *zp = ITOZ(ip);
311         int error;
312
313         error = -zfs_map(ip, vma->vm_pgoff, (caddr_t *)vma->vm_start,
314             (size_t)(vma->vm_end - vma->vm_start), vma->vm_flags);
315         if (error)
316                 return (error);
317
318         error = generic_file_mmap(filp, vma);
319         if (error)
320                 return (error);
321
322         mutex_enter(&zp->z_lock);
323         zp->z_is_mapped = 1;
324         mutex_exit(&zp->z_lock);
325
326         return (error);
327 }
328
329 /*
330  * Populate a page with data for the Linux page cache.  This function is
331  * only used to support mmap(2).  There will be an identical copy of the
332  * data in the ARC which is kept up to date via .write() and .writepage().
333  *
334  * Current this function relies on zpl_read_common() and the O_DIRECT
335  * flag to read in a page.  This works but the more correct way is to
336  * update zfs_fillpage() to be Linux friendly and use that interface.
337  */
338 static int
339 zpl_readpage(struct file *filp, struct page *pp)
340 {
341         struct inode *ip;
342         struct page *pl[1];
343         int error = 0;
344
345         ASSERT(PageLocked(pp));
346         ip = pp->mapping->host;
347         pl[0] = pp;
348
349         error = -zfs_getpage(ip, pl, 1);
350
351         if (error) {
352                 SetPageError(pp);
353                 ClearPageUptodate(pp);
354         } else {
355                 ClearPageError(pp);
356                 SetPageUptodate(pp);
357                 flush_dcache_page(pp);
358         }
359
360         unlock_page(pp);
361         return error;
362 }
363
364 /*
365  * Populate a set of pages with data for the Linux page cache.  This
366  * function will only be called for read ahead and never for demand
367  * paging.  For simplicity, the code relies on read_cache_pages() to
368  * correctly lock each page for IO and call zpl_readpage().
369  */
370 static int
371 zpl_readpages(struct file *filp, struct address_space *mapping,
372         struct list_head *pages, unsigned nr_pages)
373 {
374         return (read_cache_pages(mapping, pages,
375             (filler_t *)zpl_readpage, filp));
376 }
377
378 int
379 zpl_putpage(struct page *pp, struct writeback_control *wbc, void *data)
380 {
381         struct address_space *mapping = data;
382
383         ASSERT(PageLocked(pp));
384         ASSERT(!PageWriteback(pp));
385         ASSERT(!(current->flags & PF_NOFS));
386
387         /*
388          * Annotate this call path with a flag that indicates that it is
389          * unsafe to use KM_SLEEP during memory allocations due to the
390          * potential for a deadlock.  KM_PUSHPAGE should be used instead.
391          */
392         current->flags |= PF_NOFS;
393         (void) zfs_putpage(mapping->host, pp, wbc);
394         current->flags &= ~PF_NOFS;
395
396         return (0);
397 }
398
399 static int
400 zpl_writepages(struct address_space *mapping, struct writeback_control *wbc)
401 {
402         return write_cache_pages(mapping, wbc, zpl_putpage, mapping);
403 }
404
405 /*
406  * Write out dirty pages to the ARC, this function is only required to
407  * support mmap(2).  Mapped pages may be dirtied by memory operations
408  * which never call .write().  These dirty pages are kept in sync with
409  * the ARC buffers via this hook.
410  */
411 static int
412 zpl_writepage(struct page *pp, struct writeback_control *wbc)
413 {
414         return zpl_putpage(pp, wbc, pp->mapping);
415 }
416
417 /*
418  * The only flag combination which matches the behavior of zfs_space()
419  * is FALLOC_FL_PUNCH_HOLE.  This flag was introduced in the 2.6.38 kernel.
420  */
421 long
422 zpl_fallocate_common(struct inode *ip, int mode, loff_t offset, loff_t len)
423 {
424         cred_t *cr = CRED();
425         int error = -EOPNOTSUPP;
426
427         if (mode & FALLOC_FL_KEEP_SIZE)
428                 return (-EOPNOTSUPP);
429
430         crhold(cr);
431
432 #ifdef FALLOC_FL_PUNCH_HOLE
433         if (mode & FALLOC_FL_PUNCH_HOLE) {
434                 flock64_t bf;
435
436                 bf.l_type = F_WRLCK;
437                 bf.l_whence = 0;
438                 bf.l_start = offset;
439                 bf.l_len = len;
440                 bf.l_pid = 0;
441
442                 error = -zfs_space(ip, F_FREESP, &bf, FWRITE, offset, cr);
443         }
444 #endif /* FALLOC_FL_PUNCH_HOLE */
445
446         crfree(cr);
447
448         ASSERT3S(error, <=, 0);
449         return (error);
450 }
451
452 #ifdef HAVE_FILE_FALLOCATE
453 static long
454 zpl_fallocate(struct file *filp, int mode, loff_t offset, loff_t len)
455 {
456         return zpl_fallocate_common(filp->f_path.dentry->d_inode,
457             mode, offset, len);
458 }
459 #endif /* HAVE_FILE_FALLOCATE */
460
461 static long
462 zpl_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
463 {
464         switch (cmd) {
465         case ZFS_IOC_GETFLAGS:
466         case ZFS_IOC_SETFLAGS:
467                 return (-EOPNOTSUPP);
468         default:
469                 return (-ENOTTY);
470         }
471 }
472
473 #ifdef CONFIG_COMPAT
474 static long
475 zpl_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
476 {
477         return zpl_ioctl(filp, cmd, arg);
478 }
479 #endif /* CONFIG_COMPAT */
480
481
482 const struct address_space_operations zpl_address_space_operations = {
483         .readpages      = zpl_readpages,
484         .readpage       = zpl_readpage,
485         .writepage      = zpl_writepage,
486         .writepages     = zpl_writepages,
487 };
488
489 const struct file_operations zpl_file_operations = {
490         .open           = zpl_open,
491         .release        = zpl_release,
492         .llseek         = zpl_llseek,
493         .read           = zpl_read,
494         .write          = zpl_write,
495         .mmap           = zpl_mmap,
496         .fsync          = zpl_fsync,
497 #ifdef HAVE_FILE_FALLOCATE
498         .fallocate      = zpl_fallocate,
499 #endif /* HAVE_FILE_FALLOCATE */
500         .unlocked_ioctl = zpl_ioctl,
501 #ifdef CONFIG_COMPAT
502         .compat_ioctl   = zpl_compat_ioctl,
503 #endif
504 };
505
506 const struct file_operations zpl_dir_file_operations = {
507         .llseek         = generic_file_llseek,
508         .read           = generic_read_dir,
509         .readdir        = zpl_readdir,
510         .fsync          = zpl_fsync,
511         .unlocked_ioctl = zpl_ioctl,
512 #ifdef CONFIG_COMPAT
513         .compat_ioctl   = zpl_compat_ioctl,
514 #endif
515 };